The Automotive Blog

ISOCheck Lite is a new product from aide automotive ltd.

The ISOCheck Lite is a test box to test the Trucks ISO socket for pin faults.

Simple to use and with an excellent clear use guide this test box will quickly identify which pin has a fault.

This box makes testing an ISO 7638 socket simple and quick!

Simply plug the Susie lead into the test box, turn the truck ignition on, review the light sequence on the ISOCheck and then refer to the user guide to identify which pin is at fault.

Sales Directr Matthew Burke said “We offer excellent products in our range and the ISOCheck Lite is no different. We have seen sales increasing recently, especially through our distributors. Feedback has been excellent and follow on sales have been seen. Well done to our engineers.”

Contact aide automotive on 0115 8456471 or email shoponline@aideautomotive.com

ISO Socket Testers

aide automotives Brake Efficiency Tester BrakeCheck is the ideal way to test vehicle brakes.

VOSA are continually advising operators, commercial repairers and in house workshops to complete regular inspection sheet brake test.

Being electronic there is a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

BrakeCheck can be used and is accepted by VOSA for many vehicles, in the commercial sector VOSA approve BrakeCheck for testing all commercial type vehicles on every inspection. Within the MOT centre this device is used as back up to the roller tester but used in principal on 4×4 vehicles.

Gary Moir of MSK Waste said ” Using a Brake Efficiceny Tester such as a BrakeCheck has saved this company hundreds of pounds as taking vehicles to rollers testers for an inspection brake test is unecessary.”

Contact aide automotive for a Brake Efficiency Tester question by clicking on BRAKE EFFICIENCY 

Brake Tester Uisng Brake Efficiency to Report On Truck Brakes

aide automotive knows that workshops requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

The EBS/ABS Sensor Master is an easy to use device which will confirm each EBS/ABS sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The Master also tests the exciter ring and the distance between the ring and sensor.

The Master is the ideal tool for any user, from an apprentice to a time served fitter, or a busy workshop. Quickly identifying and clearing the fault can save time and money, rather than calling in a dealer or diagnostic expert.

Using the Sensor Tester to check a sensor, the gap and exciter ring Royal Mail found they were able to easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

aide automotives sales director said “The ABS Sensor Master has been an excellent product for cost effective ABS repairs of trucks and trailers for many years, I recall customer comments of this ABS test tool saving thousands in dealer fees and quick repairs with the vehicle quickly back on the road.”

To purchase a ABS Sensor Master please call 0115 8456471.

Sensor Tester for ABS or EBS

BrakeCheck 2 Year Warranty!

aide automotive are now pleased to offer a two year warranty on all BrakeCheck’s & Accessories

aide automotive have improved our customer service by increasing the warranty from 1 to 2 years on the BrakeCheck family & accessories!

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets and with over 13,000 testers sold BrakeCheck is now the number one reliable tester on the market.

Matthew Burke Sales Director Said “Since the launch of BrakeCheck in 2001 we have been continually looking at way to improve the tester for reliability and operational, with BrakeCheck Series 2 we now have the over whelming confidence to offer a two year warranty, operationally the BrakeCheck product is at the very top of its product sector and now we feel its top for reliability.”

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is VOSA & MOT approved.

If you have any questions on why a BrakeCheck is used on commercial vehicles or within the MOT test station please click on Brake Tester to enquire or phone 0115 8456471.

aide automotive have recently supplied all Chatfields truck locations with trailer test and diagnostics testers, Chatfields are a franchised truck repairer & distributor for DAF, Renault Truck, Hino & Iveco, predominantly across the North of England.

TrailerCheck is an intelligent trailer tester and diagnostic code reader / clearer for all makes of commercial trailers.

Wayne Edwards, the Chatfields National Franchise Director, commented “as part of the Chatfields’ one stop shop philosophy and following requests from customers, we decided to invest in the latest diagnostic and test equipment for trailers, with this we decided to invest in TrailerCheck from aide automotive ltd. This investment enables us to offer trailer maintenance service and repairs across all depots; this service also includes curtain repairs & bodywork.

aide automotive assessed the type of work our service would undertake and offered advice on the correct model type. Technical support was also part of the decision to invest in TrailerCheck, which included on-site training as part of the package. TrailerCheck has proved to be invaluable in the first few months of use in each depot, with customers feedback on the improved speed and accuracy of diagnostic repairs compared with their previous suppliers, which in turn saves our customers time and money.”

TrailerCheck is available is portable test boxes or van / workshop installed units. Remote Code Talk also covers reading and clearing of fault codes within the trailers ECU. Furthermore TrailerCheck 4 Vans  / Workshop also incorporates air test gauges enabling a total one man maintenance tool for trailers.

Contact aide automotive on 0115 8456471 for further details.

aide automotive can report on a Rear Truck Brake Fault Solution!
DAF & Scania trucks fitted with Electronic Braking Systems (EBS) could have the same fault but for different reasons. The fault occurs after the vehicle has been driven for a few miles, when the rear brakes slowly start to apply by themselves and in some cases the brakes are on so much that the vehicle is un-drivable.
There are two reasons this fault can appear, the first one is quite simple. On the rear of the vehicle there is a EBS modulator valve which controls the brake pressure to the rear brakes, one of these pipes connected to this valve is from the redundancy valve. This is a saftey back up for the brakes, if in event the EBS fails the truck is left with some brakes to stop the vehicle.

If the redundancy valve starts to leak the air pressure can build up in the pipe connected to the rear modulator valve and start to apply the rear brakes, at the same time the EBS system which constantly monitors the brake pressure when you press the brake pedal sees that there is pressure in the modulator but knows the driver dosnt have his/her fott on the brake so assumes the rear modulator is faulty and puts the EBS warning light on in the cab.

This means there is two faults being caused by the one leaking valve, the EBS causedlight on and the rear brakes applying. The easiest way to identify this fault is by removing the pipe which comes from the redunacy valve when the brakes are on, you will hear the aire pressure being released from the pipe and hear the brake come off.

The Second reason this same fault can appear is a faulty foot brake valve. On a EB System when you press the foot brake on, the foot brake valve not only supplies air pressure to the rear modulator and applies the brakes, it also sends a CAN signal to the rear modulator to apply the brakes. The CAN signal is basically an electronic signal telling the rear modulator to apply the brakes. Inside the foot brake valveare switches which knowhow far you have pressed the pedal down, if these switch’s work incorrectly they can think you have pressed the pedal down when you havent and tell the rear modulator to apply the brakes.
The easiest way to see if the fott brake valve is causing the fault is by removing the electrical connection from the foot brake when the fault appearsand you will hear the brakes release. In both cases the rear brakes usually only apply a small amount but in both cases the EBS light will come on.

aide automotive offer products to test ABS or EBS Sensors or offer brake testers for inspection sheet brake testing.

Trailer testers are available in portable format of wrokshop / van monuted testers.

Brake Faults Most Common At the Roadside, says VOSA
Defective braking systems and components top the list of reasons for prohibitions issued by VOSA at the roadside and depot checks last year.

Nine percent of prohibitions for trucks and 20 percent of prohibitions for trailers were issued because of defective brakes.

The use of a regular deceleration test such as a BrakeCheck could help reduce brake faults and keep inspection sheet paper work in order.

BrakeCheck (decelerometer) can be used and is accepted by VOSA for many vehicles, in the commercial sector VOSA approve BrakeCheck for testing all commercial type vehicles on every inspection. BrakeCheck can be used on vehicles such as, fork lifts, construction / quarry vehicles, tractors and trailers.

This device has moved on significantly from the old mechanical testers such as Tapley Meters. Being electronic there is a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

aide automotive ltd are a leading supplier of brake testing devices for Truck Inspections sheets Brake Tests.

Click on DECELEROMETER to enquire how a BrakeCheck can help you.

January has seen a good start to BrakeCheck sales for aide automotive.

Since the return after Christmas and New Years holidays enquirys and orders have been flowing for us, BrakeCheck is ideal for any truck operator to carry out an inspection sheet brake test with ease or at a cost effective manner. says Matthew Burke of aide automotive ltd.

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is VOSA & MOT approved.

If you require an inspection sheet brake tester for your trucks or trailers call aide automotive ltd on 0115 8456471 or click on www.brake-tester.co.uk to read more or contact us.

Dear Sir /Madam,

It has been 24 months since your BrakeCheck was calibrated.

With all tools in your workshop, you need to know they are working correctly and in test situations supplying the correct information. With this, we advise that your BrakeCheck is recalibrated.

We will aim to complete the recalibration of your BrakeCheck within 48 hours of receipt of the unit.

Option 1 – BrakeCheck Recalibration (ONLY)

All prices exclude VAT.

For BrakeCheck recalibration (ONLY), you will need to return the BrakeCheck only.  Please note chargers, cases, printers are not required.
It is suggested that you use a royal mail recorded delivery service / special delivery or courier to ensure that the unit(s) reach us safely.

Returns address: –
aide automotive Limited
Service Dept
Foxhall Business Centre
Foxhall Road
Nottingham, NG7 6LH

Option 2  – BrakeCheck recalibration with Service and test

For BrakeCheck recalibration, service and test, you will need to return your BrakeCheck, Printer, Chargers.
It is suggested that you use a royal mail special delivery service or courier to ensure that the unit(s) reach us safely

Returns address: –
aide automotive Limited
Service Dept
Foxhall Business Centre
Foxhall Road
Nottingham, NG7 6LH

Please be so kind as to provide a full postal address for your return and a purchase order number and invoice address?

If you have any questions, please feel free to call the office on 0115 845 6471.

Many thanks

Matthew Burke
aide automotive ltd
Tel 0115 8456471
Fax 07092 311470
Mobile 0787 6653609
www.aideautomotive.com
Address – Foxhall Business Centre – Foxhall Road – Nottingham – NG7 6LH
All orders are subject to aide automotive ltd business terms & conditions, copies supplied upon request.

Europart of Denmark have now been appointed distributors for Denamrk of the EBS/ABS Sensor Tester.

Using the Sensor Tester to check a sensor, the gap and exciter ring Royal Mail found they were able to easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

All workshops requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

Europart have ordered over 100 testers since September with an excellet response from customers.

To review the ABS Tester, click on Sensor Tester ABS.

aide automotive sell and marekt the EBS/ABS Sensor Tester in the UK.

Sensor Tester for ABS or EBS