The Automotive Blog

Trailer Brake, Electrical, Light & Diagnostics Tester

Midland Trailer Service & Repairs based in Nottingham has recently invested in a modern trailer service and maintenance tester, TrailerCheck 4 Vans.

Owner, Dave Anderson started the business with his own DIY trailer tester to get the business off the ground, now with two years behind him and a reputation second to none, Dave decided to upgrade his tools with the professional TrailerCheck & Trailer diagnostics system Code Talk.

Dave explained “Starting a new business can be daunting in the early years, so my initial set up cost was kept to a tight budget. Now I am established I decided to invest in technology tools, I had seen aide automotives TrailerCheck in the press and decided to see what benefit the system would offer me. Following my meeting with aide automotive I quickly saw the benefit of the upgrade from my DIY trailer tester to a modern tool. TrailerCheck has improved my service and with the diagnostics system I can now offer ECU code reading and clearing, a new service to my customers.”

aide automotive talk to many trailer repairers about the benefits of a modern trailer tester against DIY systems. TrailerCheck offers a safe professional tool to maintain trailer air brakes and electrical systems. DIY trailer testers are usually made at home with items found around a workshop. Also powering a trailer via a DIY box has its risks, DIY boxes tend to be powered by batteries direct to a circuit, if the trailer had a short circuit a continuous voltage could burn out the cable loom resulting in further damage and hours of re cabling work.

TrailerCheck has a micro processor controlled circuit board to enable safe trailer testing and power conservation, enabling a engineer to test multiple trailer from single charged battery supply, if using batteries to power the trailer tester a split van charger can be purchased for battery recharging while the travelling, further more mains power options are available in 240 or 110 volt modes.

TrailerCheck also has the bonus of a diagnostics interface and REMOTE controller, Code Talk is an aftermarket engineers diagnostic tool, designed by UK trailer maintenance engineers for engineers.

Simple to use and operate, Code Talk makes trailer diagnostic maintenance an affordable option to any repairer.

Code Talk is all that is needed. No requirement for code manuals, phoning dealers, phoning high rate telephone lines, all the information is within Code Talk – Code Talk is the Diagnostic Manual for Trailers!

Code Talk is supplied with all cables to communicate with trailer ECU’s and with an optional carry case. Code Talk is also a remote controller for the TrailerCheck product range. TrailerCheck is the full electrical testing tool for 24 volt trailers.

Code Talk Remote for TrailerCheck also offers voltage, wire colour and pin information via the display. Trailer repairing made Easy!

Below is a view of the modern day TrailerCheck now installed in Midland Trailer Service & Repairs Service Van.

TrailerCheck now installed in Midland Trailer Service & Repairs Service Van.

Truck Fifth Wheel Covers

On average 30% of 5th wheel grease is wasted

Millions of pounds of grease are washed off 5th wheels in this country every year. This not only has a huge impact on the environment causing water pollution but is also extremely costly to haulage and logistic businesses.

During application a significant amount of grease is either dropped in the workshop or falls off onto the tractor unit making the tractor unit dirty, unsightly and uncomfortable to work in.

Greasy residue on surfaces and on the ground can prove hazardous during hitching and can cause individuals to slip on the ground and on the back of tractor units. This has considerable implications from a health and safety view point in and in particular from an employer’s liability perspective.

On average 30% of 5th wheel grease is wasted.

Truck Fifth Wheel Lubrication Liner have Heath & Safety benefits, with less oil and grease on the fifth wheel the likelihood of oil dripping onto a hot exhaust is virtually impossible, hence protecting against truck fire.

Many companies have fitted a Truck Lube Liner recently, David Craig Haulage in Berwick Upon Tweed completed a fleet fit of the Truck Fifth Wheel Lube Covers.

Contact aide automotive on 0115 8456471

On average 30% of Truck 5th wheel grease is wasted

aide automotive Secure an Significant Order For Pallet Truck Trailer Retainer “Lee Lock”

Established in 1987, PPS have built up a reputation for well-engineered, durable and reliable products. Directors, Gary Amos and Steve Whitworth together have over 30 years’ experience in the Commercial Vehicle Bodybuilding Industry. PPS specialise in bodywork products that cover a wide range of industry sectors, including distribution and manufacturing.

Priding themselves on customer service, PPS acknowledge that bodywork built to a standard design will not suit the requirements of everyone. Therefore, each body that leaves our factory is designed and manufactured to meet the specific needs of the customer.

PPS Commercials placed an order for 30 Lee Locks with aide automotive.

Pallet Truck Trailer Retainer “Lee Lock” addresses a fairly widespread health and safety problem in a simple but ingenious way. Locking a pallet truck securely within a trailer prevents damage to goods & the trailer curtains. Erasing any potential health & safety issues of employee injury due to lifting pallet trucks from tyres or off the trailer bed.

To review the Lee Lock product page click on Pallet Truck Lock

Pallet Truck Lock – Lee Lock From aide automotive ltd

Truck HGV Blind Spot Lens

A Hi Vu Fresnel lens press-fits inside the truck’s passenger side window and is held firmly in place by its own ‘peel-back’ self-adhesive.

The Fresnel lens provides an extra downwards view for the HGV driver so that at a glance he can see any vulnerable road user that might be hidden in the mirror blind spot, alongside his passenger door.

Unlike a mirror, Hi Vu affords the driver a normal, (through the window) view of what’s close to his cab, not a reversed or inverted mirror image. That means the driver will assimilate any danger much faster and react far more quickly.

Due to a blind spot, drivers of trucks cannot see smaller vehicles or other vulnerable road users which are immediately next to the passenger side door of their HGV. These unseen road users can be hit if the truck changes lane in their direction.

DVSA says, “Even the latest HGVs with a full complement of six mirrors, in compliance with the latest EU directive, still have blind spots to the passenger side which are large enough to hide a family saloon car. The solution is to fit a special Fresnel lens.”
VOSA has conducted trials which have proven that by fitting Fresnel lenses to vehicles, both the frequency and the severity of “sideswipe” accidents is reduced.

Truck Mirror Lens Benefits

Multi-Vehicle Use – Trucks, Vans, Bus, Coach, RVs (Recreational Vehicle), SUVs (Sports Utility Vehicle) and Hatch-Backs.
Low Profile, Smallest Footprint Lens, No Window Obscurity
The Only ‘Peel Back’ Self-Adhesive Fresnel Lens available
Multi-Positional Lens Fits All Vehicle Types (LHD & RHD)
Easy to install in seconds
Strong Adhesive surround ensures the lens will not easily peel off when passing through the doors rubber weather seal

aide automotive can be contacted via email info@aideautomotive.com or by phone – 0115 8456471

Fresnel lenses are now accepted by Transport for London

Midland Trailer Service & Repairs helps companies across the Midlands keep their trailers on the road with professional servicing, repairs and MOTs.

Midland Trailer Service & Repairs is owned and run by David Anderson, who has been in the transport industry for over 20 years. David understands that nothing is more important than keeping your trailers on the road, earning you money and getting deliveries made on time.

With this Dave decided to upgrade his trailer test equipment.

Starting with his own DIY tester, Dave decided to invest and upgrade his tools with a TrailerCheck & Code Talk Diagnostic system from aide automotive ltd.

Below is a before picture of Dave’s DIY Trailer Test system.

Midland Trailer Service & Repairs is owned and run by David Anderson

WABCO have developed an economical and simple ABS diagnostic tool for trained works personnel, the Compact Tester.

With this tester it is possible for the first time to test the trailer electronics of types Vario C and VCS (Vario Compact) without documentation and carry out a proper system check. This is made possible by the logical arrangement of icons.

Name:Compact Tester
Product Code:882087
Make:Wabco
Type:Trailer ABS (Vario C and VCS)
Wabco Product Code:4463004000

aide automotive have ONE tester in stock for immediate sale, price £150.00 + carriage & VAT.

In addition to the above aide automotive also market the multi trailer diagnostics tool Code Talk, with significant cost and labour savings over PC laptop based diagnostic software.

Trailer Diagnostics Code Talk is easy to use and quick; no wasted time setting up laptops or dealing with PC software issues. No software licenses or PIN codes needed.

One single unit removes the need for manufacturer’s code readers such as the Wabco Compact Tester and Haldex Info Centre. Being compact, robust and more reliable than a Wabco Diagnostic Controller.

Trailer repairers have been expeted to pay for over the top truck & trailer diagnsotic tools like TEXA or JalTest, but not now with Code Talk!!

Code Talk has a growing list of supported ECUs including: Haldex Modal, Wabco Vario C (“Boxer”), Haldex Modular, Wabco VCS, Wabco VCS2, Haldex EB+ Gen 1, Haldex EB+ Gen 2, Haldex EB+ Gen 3, Knorr-Bremse TEBS, Wabco TEBS-D, Wabco TEBS-E, Haldex U-ABS. Beta version of Knorr-Bremse TEBS G2 support now available.

Contact aide automotive on 0115 8456471 or email shoponline@aideautomotive.com

WABCO have developed an economical and simple ABS diagnostic tool for trained works personnel, the Compact Tester.

Emergency Braking In HGVs Approaching

From November 1 this year, EU legislation will mandate the fitment of Autonomous Emergency Braking (AEB) systems on most newly registered Heavy Goods Vehicles (HGVs) over 7.5 tonnes.

Standard-fit AEB systems are currently available on nearly 11 per cent of new cars, and offered as an option on a further 18.5 per cent. According to Euro NCAP and ANCAP, the independent safety bodies for Europe and Australasia, AEB is already leading to a 38 per cent reduction in real-world rear-end crashes and proving to be the key to gaining the coveted NCAP 5 star safety rating.

Current AEB technology on some commercial vehicles exceeds the vehicle to vehicle avoidance performance of even the most advanced car systems, although cars are still capable of a much broader spectrum of avoidance scenarios including collisions with pedestrians and other vulnerable road users.

aide automotive market and promote the BackStop Auto Braking Reversing System, offered is a number of rear sensor hardware solutions, Back Stop can be retro fitted to all types of Heavy goods vehicles.

Radar, autosonic or touch sensitive bumpers can be installed with a auto braking feature to prevent vehicle or human injury!

Contact aide automotive on 0115 8456471 to enquire further about the Truck & Trailer Back Stop Auto Braking Reversing System.

Brand new Ferrari gets backed over by a delivery truck.

BrakeCheck Truck & Trailer 2nd Hand Tester

This Brake Tester Is Now Sold as of 08.07.15 11.21 am

aide automotive are able to offer a great deal on a 2nd hand Brake Tester For Truck & Trailer Printer Kit, with all the necessary chargers & spare paper rolls.

The RRP of this kit is £679.00 but this kit is available for just £525.00 + vat!

The kit is in very good condition, the BrakeCheck will be calibrated & under warranty unit November 2016!

There is only the one kit and it will sell fast so please call or email to purchase ASAP!

Earlier this year the Driver and Vehicle Standards Agency (DVSA) published a revised version of its Guide to Maintaining Roadworthiness.

DVSA also accept the use of an approved and calibrated decelerometer to carry out the three additional tests to the annual MOT roller brake test.

Call 0115 8456471 or email via the contact form here – aide automotive.

Brake Testing for trucks and trailers

TrailerCheck Installed In Kerseys Freight CV Support Vehicle

Keresy Freight have recently purchased a TrailerCheck Tester & Diagnostics system from aide automotive ltd.

Kersey Freights decision to invest in a Commercial 24 Volt Trailer Tester was down to the need to offer efficient trailer serving and preparation for road work.

Transport Manager Bob Steele said “The TrailerCheck is working OK and our fitter is really pleased with it!”

Designed as mounted trailer tester for a Van or workshop, the TrailerCheck 4 Vans is a One Man Trailer Service tool with the option of ECU Trailer Diagnostics.

For further information on the TrailerCheck, contact aide automotive ltd on 0115 8456471

TrailerCheck Installed In Kerseys Freight CV Support Vehicle

aide Promote Brake & Diagnostics Through The Truck & Bus Email Focus.

The Truck & Bus Email Focus edition for Brake Servicing & Diagnostics featured aide automotive in March. With an email circulation of over 12,000, The Focus is an ideal product promotion vehicle to the commercial vehicle sector.

DVSA accept the use of an approved and calibrated decelerometer for truck brake testing, with the BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss. Click on BrakeCheck Deceleromter for further information.

Deceleometer
For Trailer Servicing & Diagnostics, aide offer a complete trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing. Click on Trailer Diagnostics or Trailer Light & Air Tester for further information.

DiagnosticsTrailer Servicing

EBS/ABS Sensor testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester. Click on EBS Sensor Master or Midtronics MDX for further information.

EBS ABS Sensor TesterBattery Diagnostics Tester

aide automotive offer a range on commercial vehicle workshop products, call 0115 8456471 to enquire.

Sensor Tester for ABS or EBS