The Automotive Blog

aide auto Quickly Responds To Customer Request For A New Feature On TestaTow

TestaTow is a 12 Volt portable Trailer Wiring Tester for small Semi Trailers such as Ifor Williams, horse box, Agricultural trailers & Caravans.

Bad Earth Test On Trailer Indicator Lights

NEW  – TestaTow The Professionals Tester

aide automotive have introduced a NEW Caravan Electrical Tester called TestaTow.

Trailer, Caravan Electrical Lights Testercara

12 Volt Trailer & Caravan Lights Tester

New Product – TestaTow Is A Universal Towing Tester

Trailer, Caravan Electrical Lights Tester

With the new requirement of testing 13 Pin tow bar electrics from January 2012, aide automotive have introduced a tester for the “professionals ” The Tow Bar Tester Pro.
Testing 13 pin tow bar electrics will be a growing requirement of the MOT over the next 3 years, with many new cars having  tow bars with 13 pin rather than the 7 pin sockets used in the past. Also, when caravans moved to 13 pin sockets in 2009, many cars had 13 pin sockets installed therefore a number of cars will need testing within 2012 and many more in 2013 / 2014.

As the TowBar Tester Pro is the ultimate towing electrical tester it can also be used to test the positive 12 volt ignition switched live and positive 15 volt ignition live. To complete all tow bar electrical tests the Tow Bar Tester Pro will also test the reverse lamp. As this is the most comprehensive tester on the market, every tow bar test undertaken will leave you satisfied all aspects of the tow bar electrics are working and your customer can tow with confidence.
So with the RIGHT tester there is no chance of wasting time consulting VOSA on erratic test readings, no chance of incorrect failures and also has usages beyond the MOT test.

Contact aide automotive by clicking on 13 Pin Tow Bar Tester.

13 Pin MOT Apporved Tow Bar Tester

13 Pin Tow Bar Tester For MOT
2012 MOT Requirement for Testing 13 Pin Tow Bars
With the new requirement of testing 13 Pin tow bar electrics from January 20012, aide automotive have introduced a tester for the “professionals “ The Tow Bar Tester Pro.
Testing 13 pin tow bar electrics will be a growing requirement of the MOT over the next 3 years with many new cars having a tow bars with 13 pin rather than the 7 pin socket used in the past. Also when caravans moved to 13 pin sockets in 2009 many cars had 13 pin sockets installed so a number of cars will need testing within 2012 and many more in 2003 and 4.
MOT Garages will need a VOSA approved tester to carry out this test and we believe The Tow Bar Tester Pro is the ultimate tester for testing all old and modern day tow bar systems, The Tow Bar Tester Pro has been designed and produced by industry tow bar electric system leaders Right Connections Ltd to be the best all round tester available.
The Tow Bar Tester Pro is built in a rugged case with actual bulbs to replicate all lights and to test as if a trailer was connected, with this there is no risk of confusion of failure or incorrectly failing a vehicle. Some low cost testers that use LED’s have shown inconsistent results when testing tow bars and indicating faults when there is not! Also found with low cost tester was that if the power line is not present on the tow bar socket then the tester will not work at all!!
Tow Bar Tester Pro incorporates a self test facility as required by VOSA specification, powered from the vehicle with a 13 pin cable long enough to connect to the tow bar socket, the operator will activate all tests via toggle switches on the main control board from the drivers seat.
In addition to the MOT requirement test The Tow Bar Tester Pro will also test the flasher warning system on the towing vehicle, although this is not part of the MOT test as yet, but if it ever becomes so Tow Bar Tester Pro incorporates this test. As the MOT garages have seen over the years, new requirements often have special notice amendments to update the test with unforeseen requirements from the first test specification; we believe this could be the case in the future as under European law there is a legal requirement for flashers on the trailer to be monitored by the towing vehicle for failure.
As the Tow Bar Tester Pro is the ultimate towing electrical tester it can also be used to test the positive 12 volt live and positive 15 volt ignition live, to complete all tow bar electrical tests the Tow Bar Tester Pro will also test the reverse lamp. As this is the most comprehensive tester on the market every  tow bar test undertaken will leave you satisfied all aspects of the tow bar electrics are working and your customer can tow with confidence.
So with the RIGHT tester there is no chance of wasting time consulting VOSA on erratic test readings, no chance of incorrect failures and usages beyond the MOT test.

Contact aide automotive to purchase a Tow Bar Tester Pro.

Tow bar testing will be an essential part of the MOT tests from next year, VOSA regulations will come into force on the 1st January 2012 and all
13 pin tow bars on Classes 3, 4, 5 & 7 will need to be tested.
aide automotive are stocking a 13-pin TowBar Tester to check the 13-pin electrical towing sockets fitted to vehicles with tow-bars. If the sockets are faulty, then trailer or caravan lights may not work. The device enables a single MOT Tester to test the 13 pin socket easily and quickly. The hand held casing has been designed to be light weight and tough, with rounded edges to prevent damage should it come into accidental contact with either the vehicle’s bodywork or interior, the display LED’s are bright enough to be seen even in direct sunlight and the lead is a generous 5m long with a rugged, moulded 13pin plug.
Ergonomics and ease of use were a major consideration when the this tester was designed, the smaller thinner case makes the unit easier to
hold, and the recessed self test button helps prevent accidental operation, the intuitive label graphic quickly guides the operator as to which light is being tested as it replicates the rear of a vehicle and the light position.
Priced at £49.99 + vat this tester is ideal for MOT Garages or Prep Garages to carry out the Tow Bar Socket Test.
Contact aide automotive ltd to purchase a 13 Pin TowBar Tester today!

13 Pin Tow Bar Socket Tester

January sees the introduction of the testing of the 13 pin tow bar socket within the UK MOT scheme.

Reason for Rejection of the 13 Pin Tow Bar would be:

A towbar component insecure, fractured or excessively:

worn,corroded, or damaged.

• Towbar assembly is attached to the vehicle structure using a mounting,
  support or fixing which is obviously of an inappropriate size or type.
• Retaining device missing or insecure
• locking device missing, insecure, inadequate or damaged to the extent that
  its operation is impaired.
• Excessive play between a detachable tow ball and its receiver socket
• a quick release mechanism that does not secure the tow ball arm as intended.

Contact aide automotive to see the range of electrical tow bar testers available.

Towbar Testing will be an essential part of the MOT tests from next year, VOSA regulations will come into force on 1st January 2012 and all towbars will need to be tested.

aide automotive are stocking a 13-pin Towbar Tester to check the 13-pin electrical towing sockets fitted to vehicles with tow-bars. If the sockets are faulty, then trailer or caravan lights may not work.

Purchase a VOSA approved 13 Pin Socket Tester from aide automotive today!

From January2012 it is now within the  MOT test to test any car with a 13 pin tow bar socket.

aide automotive are stocking a 13-pin Towbar Tester to check the 13-pin electrical towing sockets fitted to vehicles with tow-bars. If the sockets are faulty, then trailer or caravan lights may not work. This device checks the output from each pin on the socket and determines if it’s working or not

MOT garages need to review this product if booking any car in for an MOT with a TowBar electrical socket.

Contact aide automotive for further information.

Towbar Testing will be an essential part of the MOT tests from next year, VOSA regulations will come into force on 1st January 2012 and all towbars will need to be tested. aide automotive are stocking a 13-pin Towbar Tester to check the 13-pin electrical towing sockets fitted to vehicles with tow-bars. If the sockets are faulty, then trailer or caravan lights may not work. This device checks the output from each pin on the socket and determines if it’s working or not

The device enables the owner to test if all the lights are working and specifically if they;re not to determine which socket isn’t working so you can determine if it’s the fog lights, indicators, brake lights,

So if you have a caravan or trailer with a 13-pin, you’ll need one of these devices before the end of the year so you can ensure the lights are working correctly before you take your vehicle in for a MOT test otherwise it may fail!

Contact aide automotive for more details