The Automotive Blog

The Old Mechanical Brake Tester Tapley Now Retired As DVSA Say A Print Out Required

For almost 100 years Tapley brake testers have been the market leading portable brake testing equipment.

Results of Tapley Brake meter tests have been accepted as evidence of braking efficiency in Courts of Law throughout the world.

But now it seems the Tapley Brake Tester may well be retired in the UK, recent guidance from the DVSA now says a brake test must be printed for inspection records.

Decelerometers have moved on significantly from the old mechanical brake testers such as Tapley Decelerometer. Being electronic BrakeCheck has a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

Contact aide automotive to discuss the recent DVSA brake testing guidance and BrakeCheck. – Call 0115 8456471

MOT Tapley Brake Meter

EBS/ABS Sensor Master Order Receives Praise

Tested the EBS ABS Sensor Tester and it is an impressive piece of kit!

The EBS ABS Sensor Tester is the ideal tool for any user, from an apprentice to a time served fitter, or a busy workshop. Quickly identifying and clearing the fault can save time and money, rather than calling in a dealer or diagnostic expert.

“The order arrived as promised. We have tried out the EBS Sensor Tester and it is an impressive piece of kit. Many thanks for your prompt service.” stated Neil Robinson Tyson Haulage

To read more and download a PDF product brochure click on Trailer Sensor Tester.

Call aide automotive on 0115 8456471.

Sensor Tester for ABS or EBS

DVSA Recommend 4 Brake Tests Per Year!!

Document :Guide to maintaining road worthiness
Commercial goods and passenger carrying vehicles (Revised 2014)

Section 5: Safety inspection and repair facilities

Extract –
“Therefore it is normally expected that the vehicle or trailer should complete at least three successful brake efficiency tests spread throughout year in addition to the annual MOT test.”

BrakeCheck is a portable brake tester that works from the principle of measuring deceleration or Brake Efficiency, BrakeCheck has been proved to be a good indication of brake performance and cost effective for any workshop. Over 15,000 BrakeCheck’s have been purchased since it’s introduction in January 2003, and is now a standard tool for any vehicle workshop.

In addition to BrakeCheck Standard which is marketed towards Car, Van Truck and Bus / Coaches, BrakeCheck For Truck &Trailers is ideal for trailer operating companies.

aide automotive also recommend the use of an Infra Red Thermometer to check individual wheels via temperature. This in conjunction with a decelerometer print out would be the perfect 3 times a year brake test for any commercial vehicle.

To discuss how BrakeCheck or the Brake Testing Equipment works or to review pricing please call us on 0115 8456471.

Brake Tester Using Brake Efficiency to Report On Truck Brakes

Trailer Light Tester For Farming Trailers

Improving on an earlier version of the Agricultural Trailer Light Tester, Richard Western returned to aide automotive to review the latest 12 Volt TrailerCheck – Trailer Light Tester.

The 12 Volt TrailerCheck – Trailer Light Tester is designed to make the testing and repair of trailer lights faster and much simpler. Power is taken from the leisure battery for this product but for portable use aide automotive offer the 12 Volt TrailerCheck Plus, read more at 12 Volt TrailerCheck Plus.

Where 12V TrailerCheck Trailer Light Tester really scores is when there is a fault.

The Agricultural Trailer Light Tester will hold power on the faulty circuit leaving both hands free while you trace the problem. Then if you need to work on the circuit you use the handset to switch the power to another light or off altogether. Thus repairing without risking a short circuit, switch the power to re test with no need to move.

Based in Suffolk, England, UK, Richard Western design and manufacture a range of machines including grain trailers, rootcrop trailers, grain chasers, silage trailers, dumper trailers, muck spreaders, dual spreaders, slurry tankers, vacuum tankers, bowsers, field runners and transfer wagons. Proud of their reputation for producing machines that are robustly built and will give trouble free performance.

Richard Western have more than 40 years experience supplying machines for agriculture and we are available to help you with your requirements and specifications to ensure that you get the machine best suited to your individual requirements.

Visit the aide automotive Ltd website for more information on Trailer Light Tester For Farming Trailers

13 Pin MOT Apporved Tow Bar Tester

Bulk Freight Purchase Trailer Diagnostics.

Since it’s formation in 1987, Bulkfreight (Midlands) Ltd has maintained it’s ethos of putting the customers requirements first.

Operating a fleet of over 100 articulated vehicles, which are changed every three years. This ensures we operate a “Green Fleet” that meets the current exhaust emission regulations. Our trailer fleet comprises of, Walking Floors, Ejectors & Bulk Tippers.

To meet the maintenance required for the fleet, workshop manager invested in the TrailerCheck 4 Vans, trailer light, Air Brake and ISO tester.

Designed as a mounted trailer tester in a Van or workshop the TrailerCheck 4 Vans is a One Man Trailer Service tool with the option of ECU Trailer Diagnostics.

The Trailer Air Brake And Light Tester is an intelligent unit and has the capability to power multiple trailers without the inconvenience of continually recharging external batteries.

A single trailer service engineer can be under a trailer activating brakes and reading pressures.

Switching brakes on and off allows the user to look for wear in s cams and faulty slack adjusters. The digital pressure gauge measures pressure at the brake chamber, ideal for setting load sensing valves.

EBS Trailers can be tested for CAN line integrity, a quick and simple test to confirm the CAN lines.

Neil Mitchell said “Modern times require a modern approach, the quick and correct maintenance of trailers is as critical as trucks, having the latest up to date test tools is what I believe will make our maintenance routines efficient and to a high standard. Looking at the old Scrutineer and the TrailerCheck 4 Vans, I chose the later due to its modern design and latest electronics. Furthermore I have the option to add full trailer code diagnostics when I see fit.”

 

Contact aide automotive on 0115 8456471 to talk about Diagnostics.

Trailer Diagnostics for East Midlands Bulk Freight Company

More & More Commercial Vehicle Operators Purchase BrakeCheck To Complete Their Inspection Sheets.

Roger Jackson of Ensign Bus said “We have now purchased Bowmonk BrakeCheck for all our depots and find it a valuable addition to our workshops. To have the ability to carryout positive testing and to record actual results on an inspection sheet is very beneficial.”

Decelerometers have moved on significantly from the old mechanical brake testers such as Tapley Decelerometer. Being electronic there is a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

BrakeCheck has been proven to be an excellent inspection sheet Bowmonk brake tester for all commercial vehicles, over 14000 testers sold since 2002. With many operators using the BrakeCheck to conduct a VOSA accepted brake test on every inspection.

BrakeCheck Truck & Trailer will brake test tractor units, rigid trucks and also incorporates a 99 test memory on the service, hand and trailer brake test, a total of 297 tests. The trailer brake test feature enables repairers and internal maintenance workshops to conduct an inspection sheet brake test of a commercial trailer.

Brake Tester Using Brake Efficiency to Report On Truck Brakes

Transport Operator’s annual Brake Testing feature in Truck & Bus Product Focus went out on 6th Of March this year.

With three Brake Testing Product adverts added by aide automotive, the email focus is am ideal marketing platform for transport related products.

Truck & Bus Product Focus is live and online for a full 12 months. Now having an 11,500 email database compared to 7,500 when we launched. Truck & Bus Product Focus is achieving an average open rate of 22.3%. The average for business to business is 5%-15%.
Our average click thru rate to company websites is 107 clicks per entry, which again is above average for business to business.

aide automotive advertised the BrakeCheck portable brake tester, approved by VOSA for many vehicles; in the commercial sector VOSA accept BrakeCheck for testing all commercial type vehicles on every inspection.

Also advertised under the focus as the EBS/ABS Sensor Master. Easy truck & trailer brake faults repaired with this excellent cost effective tester.

Finally Trailer Brake Testing using the TrailerCheck product range, testing of the ABS or EBS CAN Lines of a trailer.

You can see the Product Focus by clicking on Brake Testers.

Contact aide automotive to review and price any of our brake testing products.

Brake Tester Using Brake Efficiency to Report On Truck Brakes

Code Talk Trailer Diagnostics Interface to now cover Wabco TEBS E.

Code Talk is a hand held trailer diagnostics manual for trailer repairers of older ABS systems or the latest EBS systems.

The diagnostics hand set will communicate with a trailer’s ECU, reading and clearing ABS/EBS fault codes on Wabco, Knorr Bremse and Haldex systems. Trailer workshops can eliminate fault finding by reading the ECU codes to determine where a fault lies. Being able to clear historic codes is ideal within a service and inspection.

Technical system applications:

Haldex ABS
Wabco ABS
Knorr Bremse ABS
Haldex EBS Generation 1,2 & 3
Wabco TEBS E & D
Knorr Bremse EBS Gen 1

Future updates will cover newer systems and with no annual software fee, Code Talk is the best and most cost effective diagnostics kit in the world!

Code Talk also acts a remote control for the TrailerCheck product range, further information on lighting wires, voltages and pin out information via the display makes this product an ideal investment for any trailer workshop.

Contact aide automotive ltd for prices of Code Talk Trailer Diagnostics and any direct questions.

Cost Effect Trailer Daignostics

Improve Trailer Maintenance With the Unbeatable Code Talk

Code Talk is the next generation of trailer diagnostic tools from aide automotive ltd. Code Talk is an ideal cost effective diagnostic tool to quickly read and clear codes on EBS/ ABS braking system.

The hand set will communicate with a trailer’s ECU, reading and clearing ABS/EBS fault codes on Wabco, Knorr Bremse and Haldex systems. With this workshops can eliminate fault finding by reading the ECU codes to determine where the fault lies. Being able to clear historic codes is ideal within a service and inspection, knowing a system is clear and then reviewing to see that faults the ECU has recorded is beneficial.

With NO annual software fee the Code Talk is by far the best Trailer Diagnostic Tool on the UK market. Upgrade able for future proofing the Code Talk will out last and beat any Texa or JalTest system.

Code Talk Diagnostic is an aftermarket engineer diagnostic tool, Code Talk has been designed by UK trailer maintenance engineers for engineers. Simple to use and operate, Code Talk makes trailer diagnostic maintenance an affordable option to any repairer.

Remember Code Talk is all that is needed. No requirement for code manuals, phoning dealers, phoning high rate telephone lines, all the information is within Code Talk – Code Talk is the Diagnostic Manual for Trailers!

Code Talk is supplied with all cables to communicate with trailer ECU’s and with an optional carry case. Code Talk is also a remote controller for the TrailerCheck product range. TrailerCheck is the full electrical testing tool for 24 volt trailers.

Code Talk Remote for TrailerCheck also offers voltage and wire pin and colour information on the display. Trailer repairing Easy!

Matt Burke advised ” This excellent product is ideal for a trailer service engineer, low cost diagnostics and with no annual software fee this device will improve maintenance and work.”

Contact aide automotive by clicking Code Talk Trailer Diagnostics

Trailer Diagnostics With Code Talk a ECU Code Reader

ISOCheck Lite is a new product from aide automotive ltd.

The ISOCheck Lite is a test box to test the Trucks ISO socket for pin faults.

Simple to use and with an excellent clear use guide this test box will quickly identify which pin has a fault.

This box makes testing an ISO 7638 socket simple and quick!

Simply plug the Susie lead into the test box, turn the truck ignition on, review the light sequence on the ISOCheck and then refer to the user guide to identify which pin is at fault.

Sales Directr Matthew Burke said “We offer excellent products in our range and the ISOCheck Lite is no different. We have seen sales increasing recently, especially through our distributors. Feedback has been excellent and follow on sales have been seen. Well done to our engineers.”

Contact aide automotive on 0115 8456471 or email shoponline@aideautomotive.com

ISO Socket Testers