The Automotive Blog

Commercial Vehicle Brake Caliper Tester

The tester is used to check the potentiometers (wear indicators) in brake calipers and for the determination of the wear of the brake disc and brake pads.

The practice of checking a potentiometer for faults and replacement could save a commercial vehicle operator thousands instead of complete caliper replacements!!

The reported practise of replacing a complete calipers rather than testing and replacing a potentiometer is in the past if you own an aide automotive Potentiometer Tester.

The procedure for checking the potentiometer can be carried out with the caliper installed on the vehicle or with the caliper removed, simply connect the supplied correct cable to the brake potentiometer, power the tester and choose which type you are testing, MAN / Mercedes 3 Wire Gold DAF / Mercedes 2 Wire Scania / Iveco / Mercedes 3 Wire Silver

The display will show the voltage, pad wear percentage & bar graph.

To set a new potentiometer simply wind the potentiometer until the display show 0 %, done!!

To test a potentiometer, wind the potentiometer until about 2.75 volts, this will show low pads warning and then to 100% for failure warning. SIMPLE!!

So start testing & replacing potentiometers to save money today!!

Visit the aide automotive Ltd website for more information on Commercial Vehicle Brake Caliper Tester

Truck Potentiometer Tester For Brake Calipers

Trailer Diagnostic Tester 24 volt Live Demo By Whiteline Services

Following the purchase of a TrailerCheck 4 Vans By Wycombe based trailer inspection and repair company Whiteline Services, Owner Daniel Bryant has filmed the 24 volt trailer light tester in operation.

Daniel says “Working within a truck dealership for many years, i saw the need to to offer an on site inspection and trailer repair service. With this i had no hesitation in investing in the TrailerCheck 4 Vans & Code Talk Trailer Diagnostics. The product is ideal for me to prove the service we supply in professional & safe. Working with aide automotive has been a breeze and i am sure we will work further on products and media showcasing.”

The Trailer Air Brake And Light Tester is an intelligent unit and has the capability to power multiple trailers without the inconvenience of continually recharging external batteries.

EBS Trailers can be tested for CAN line integrity, a quick and simple test to confirm the CAN lines.

To see further details of the Trailer Light & Air Brake Tester click on TrailerCheck.

Also feel free to call aide automotive on 0115 8456471 to enquire.

Trailer Diagnostics for East Midlands Bulk Freight Company

Code Talk Trailer Diagnostics Interface to now cover Wabco TEBS E.

Code Talk is a hand held trailer diagnostics manual for trailer repairers of older ABS systems or the latest EBS systems.

The diagnostics hand set will communicate with a trailer’s ECU, reading and clearing ABS/EBS fault codes on Wabco, Knorr Bremse and Haldex systems. Trailer workshops can eliminate fault finding by reading the ECU codes to determine where a fault lies. Being able to clear historic codes is ideal within a service and inspection.

Technical system applications:

Haldex ABS
Wabco ABS
Knorr Bremse ABS
Haldex EBS Generation 1,2 & 3
Wabco TEBS E & D
Knorr Bremse EBS Gen 1

Future updates will cover newer systems and with no annual software fee, Code Talk is the best and most cost effective diagnostics kit in the world!

Code Talk also acts a remote control for the TrailerCheck product range, further information on lighting wires, voltages and pin out information via the display makes this product an ideal investment for any trailer workshop.

Contact aide automotive ltd for prices of Code Talk Trailer Diagnostics and any direct questions.

Cost Effect Trailer Daignostics

TrailerCheck 4 Vans installed in 22 TIP Service Vans. aide automotive Ltd

TrailerCheck’s ECU diagnostics Reader has now the option of reading and clearing codes on the following systems: Haldex, Wabco & Knor Bremse Anti Lock Braking Systems and Haldex, Wabco & Knor Bremse Electronic Braking Systems.

TrailerCheck is available is portable test boxes or van / workshop installed units. Remote Code Talk also covers reading and clearing of fault codes within the trailers ECU. Furthermore TrailerCheck 4 Vans  / Workshop also incorporates air test gauges enabling a total one man maintenance tool for trailers.

TIP Trailer Rental part of GE Capital recently placed an order for 22 Trailer Lights and Diagnostic testers, positive feedback made the decision to move from a Scrutineer to the Van TrailerCheck.

Trailer Tester As Supplied to TIP Trailer Rental

Since the introduction of the ISOCheck to aide automotive product range, sales have increased each day.

Companies wishing to purchase this product include, DHL, Derek Linch Transport, TDG, Alex Aiken & Son, WH Malcolm and S.H Pratt & Co (Bananas) Limited.

Many other companies have show interest in the product with sales currently at 75 +.

The ISOCheck Test Lead is designed with a ring of bright LED’s, with a correct operating system a ring of GREEN LED’s will light, enabling any manager or driver to easily see if the system is operational, a ring of RED LED’s indicates a fault.

To test, simply plug into the ISO socket on the tractor, if GREEN then turn the lead around and plug into the trailer, this will indicate if a fault lies with the tractor or the trailer.