ISOCheck Prevents Trailer Rollover!!

Truck & Bus Email Focus On Time This Week. Truck Body Components is this weeks feature, aide automotive feature again….

ISOCheck can be used as a constant visual aide on any truck and trailer, especially for double decker or car transporter trailers.

Double decker trailers with a defective EBS system would vastly increase the chances of roll over or jack-knife.

With ISOCheck in place a driver or depot gateman would be able to see the RED warning light. ISOCheck EBS tests the ISO Socket 7638 Pins 1 to 5 but also tests Pins 6 & 7,”the EBS CAN lines”. ISOCheck is compatible with all electronic braking systems, Wabco, Knorr Bremse and Haldex,

Contact aide automotive for prices / information

0115 8456471

info@aideautomotive.com

Double decker trailers with a defective EBS system would vastly increase the chances of roll over or jack-knife

Truck & Bus Product Focus Email For November is “HGV Trailer Servicing” Featuring aide auto’s TrailerCheck 4 Vans, Code Talk Trailer Diagnostics & ISOCheck.

Van Trailer Check enables a one man quick mobile or workshop trailer service & diagnostics test on; lighting, ABS-EBS-CAN circuits and all air brake systems on trailers in one unit.

• Reduces time to service, inspect or find faults on trailers. • Safer, you’re in control and no smokey, noisy tractor unit up front.

• Makes brake testing a one man job.

• Enables you to fix multiple trailers – earning you more money

N&S Commercial Services in the Vale Of Glamorgan have been using the TrailerCheck 4 Vans for 5 years! With 5 kits within service vans, James Stauber commented; ‘’These 5 Testers are made so well we have not had to repair or replace them In 5 years!”

Midland Trailer Service & Repairs are another user; “TrailerCheck has improved my service and with the diagnostics system I can now offer ECU code reading and clearing, a new service to my customers.”

Stay OCRS compliant Stay compliant and protect your OCRS with Aide Automotive genius products: Code Talk Diagnostics and ISO-Check, save hours finding faults on your trailer.

Code Talk is a world renowned, diagnostics, hand held, fault code reader, for a variety of trailer manufacturers and specifically their ABS/EBS brake systems. Simply plug into the 7638 dedicated EBS Suzy and it will read out and clear any fault codes that the trailer may have. Code Talk can also show live air pressures, wheel speeds, and system voltages which also helps with quick diagnostics. It can also act as a remote to our TrailerCheck and TC products.

ISO-Check visually alerts you if there is a problem with the connection/power from the tractor unit or with your trailers braking system. It works by measuring the voltages on all 7 pins in the dedicated 7638 lead. If all pins are ok the light will glow green, if there is a fault on any pin the light will glow red. As an extra we can make the red light flash a certain number of times to indicate which pin is at fault. e.g. 2 flashes means pin 2 is faulty.

Contact aide automotive for prices or technical support – 0115 8456471

Truck & Bus Product Focus Email For November is “HGV Trailer Servicing

aide automotive offer a range of commercial vehicle (Truck, Trailer & Bus) Repair Tester & Diagnostics.

Trailer Inspections Using TrailerCheck Specialist Truck & Trailer Services Says “TrailerCheck Is A Superb bit of Kit” aide automotive recently supplied a TrailerCheck & Code Talk Diagnostic System to Specialist Truck & Trailer Services Ltd. Owner Charlie is so impressed with the kit he recently Tweeted “Another day on trailer inspections using @aideautomotive van trailer check system. Superb bit of kit”. TrailerCheck has a micro processor controlled circuit board to enable safe trailer testing and power conservation, enabling a engineer to test multiple trailer from single charged battery supply, if using batteries to power the trailer tester a split van charger can be purchased for battery recharging while the travelling, further more mains power options are available. TrailerCheck also has the bonus of a diagnostics interface and REMOTE controller, Code Talk is an aftermarket engineers diagnostic tool, designed by UK trailer maintenance engineers for engineers. Simple to use and operate, Code Talk makes trailer diagnostic maintenance an affordable option to any repairer.

EBS/ABS Sensor and Exciter Ring Tester The SensorMaster is compatible with 90% of applications as standard. It works with any ABS/EBS system made by Knorr Bremse, Haldex or Wabco fitted to any type of commercial vehicle whether it be truck, trailer, bus or coach. The SensorMaster tests for the following causes of sensor related faults: Correct OHMS resistance Open Circuit Short Circuit Pole ring tooth damage Pole ring mis-alignment Sensor gap measurement Lightweight, portable and simple to operate The SensorMaster is supplied with a 1.6m high quality cable and a separate universal adapter for those applications where the standard lead’s termination is not applicable. The EBS / ABS Sensor Tester comes ready to use straight out of the box.

PoTesta (HGV Brake Caliper Tester). This tester is used to check caliper potentiometer readings and to determine the wear status of brake discs and brake pads. Brake discs and brake pads are some of the most important wearing parts on vehicles. Before replacing them it is worth testing them with an automotive Potentiometer Tester. To check the potentiometer simply connect the corresponding cable to the brake potentiometer, power the tester and choose which type you are testing. This can be can be carried out with the caliper installed on the vehicle or with the caliper removed.

Contact aide automotive For Prices & Tech Information – 0115 8456471

EBS/ABS Sensor & Exciter Ring Tester SensorMaster is compatible with 90% of applications as standard. It works with any ABS/EBS system / Knorr Bremse, #Haldex or #Wabco fitted to any type of commercial vehicle whether it be #truck, #trailer, #bus or coach

With the growing need for fault finding the modern way, Code Talk Trailer Diagnostics is becoming more and more of interest to the commercial vehicle trade.

Cooks Commercials, based in Taunton consulted aide automotive of the available tools to determine faults on trailers, reviewing TrailerCheck, The EBS ABS Sensor Master & Code Talk it became obvious the full trailer diagnostic system Code Talk was the correct tool.

Code Talk is a world-renowned Diagnostics Handheld Fault Code Reader for all Trailer Manufacturers including WABCO, HALDEX, KNORR-BREMSE and specifically their trailer ABS/EBS Brake systems. This product is used by being plugged into the braking ECU and will read out and clear any fault codes that the trailer may have. The Code Talk can also show live air pressures, wheel speeds, and system voltages which also helps with the diagnostics on the trailer. It can also act as a remote to our VTC allowing you to work from inside an HGV Service Van.

With NO annual software fee with Code Talk, this trailer diagnostics tool is by far the best on the UK market. Up gradable for future proofing, the Code Talk will outlast and beat any Texa or JalTest system.

Code Talk Trailer Diagnostics is an aftermarket engineers’ diagnostic tool, designed by UK trailer maintenance engineers for engineers.

Contact aide automotive on 0115 8456471 To Discuss Trailer Diagnostics for a Haulage Trailer Fleet

Code Talk is the next generation of trailer diagnostics from aide automotive ltd.

This Is The ISOCheck EBS Plus Tool.

Designed By Our In House Tech Team The ISOCheck Tool Will Test The ISO7638 Socket On The Rear Of A Tractor Unit.

Trucks first used on the road on or after 1 May 2002 must be fitted with ISO 7638 connections. If a truck is fitted with an Electronic Braking System (EBS) and is towing a trailer fitted with EBS then a 7 core cable must be used. Trucks & Trailers with a defective EBS system (especially double decker trailers) would vastly increase the chances of roll over or jack-knife.

The simple & quick procedure of attaching the tester to the ISO7638 Truck Susie Socket and turning on the ignition will confirm Green for Good Or Red for Fault! So when the truck is returned to the road all information from the trucks ISO7638 can be trusted & proven.

Also, if the RED light indicates a fault, ISOCheck EBS-Plus will indicate which pin is at fault. Once the initial power test is complete with a RED fault light, ISOCheck will then go into diagnostic mode and flash a 1 to 7 count sequence in relation to the faulty pin.

ISOCheck EBS will test all electronic braking systems, Wabco, Knorr Bremse and Haldex, covering the differences between the early generations and the latest.

So for truck manufacturer workshops to large haulage fleets to small independent commercial repairers, ISOCheck Is An Ideal Tool!

Inspection Sheet Check Of The ISO Brake Line Creates A Safety Brake Check.

aide automotive 0n 0115 8456471

What Is The ISO EBS Truck & Trailer Lead?

Faulty ISO7638 Line Can Cause Fatal Accidents

Some drivers aren’t aware of the role Of the ISO ABS / EBS Susie!

ISOCheck lights bright RED when a fault is identified, if good to go the ISOCheck is continually lit bright GREEN.

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

What Is The ISO EBS Truck & Trailer Lead

What Is The ISO EBS Truck & Trailer Lead?

aide automotive launches improved ISOCheck

EBS ISOCheck Now Available In Addition To the ABS ISOCheck – Review Products Details & Buy Online

Commercial Vehicle Equipment Supplier aide automotive Has Launched An Updated Version Of The ISOCheck

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

The latest iteration of the system – ISOCheck EBS – has been designed to test electronic braking systems incorporating a CAN line test.

“Trucks that were first used on or after 1 May 2002 must be fitted with A ISO 7638 connection,”

“If a truck is fitted with an Electronic Brake System, and is also towing a trailer that is fitted with EBS, then a 7-core cable must be used.

Like the ISOCheck ABS tester, ISOCheck EBS tests the ISO Socket 7638 pins 1 to 5, but also tests pins 6 and 7, the EBS CAN lines.

Alongside the standard ABS & EBS ISOChecks we can also offer a diagnostic EBS ISOCheck.

ISOCheck EBSPlus test pins 1 to 7, and identifies the exact pin at fault.

Once the initial power test is complete with a RED fault light, the ISOCheck will then go into diagnostic mode and flash a count sequence in relation to the faulty pin,

The ISOCheck product range has benefited from a complete redesign, incorporating the latest electronics technology which enables future proofing truck and trailer brake systems.

ISOCheck can be used to test all Wabco, Knorr-Bremse and Haldex systems, from the early generations to the latest.

Testing is simple and easy,

ISOCheck can be used in many ways: fault-finding by the roadside or as an inspection sheet test within a workshop.

ISOCheck really becomes the perfect test tool on a dark wet night. The quick test and the bright (GREEN) OK / (RED) FAULT indicator increases test and repair efficiency.

The system can also be used continuously between a unit and trailer as a constant visual aide.

To purchase the ISOCheck product range via our online PayPal shop – Click On Purchase ISOCheck Now!

More From Matthew Burke on 0115 8456471 or matt@aideautomotive.com

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

ISOCheck Re Launch & New User Guide

ISOCheck Is a Electrical Truck Brake Tester

ISOCheck Re Launch Coming Soon!

Prices Now Released For ISOCheck

aide automotive ltd will relaunch the latest version of the ISOCheck soon.

The latest ISOCheck EBS will test pins 1 to 5 and EBS 6 & 7!!

ISOCheck will be available in three lead options:

ISOCheck – ABS – Tests ABS Systems Pins 1 to 5

ISOCheck – EBS – Tests ABS Systems Pins 1 to 7

ISOCheck EBS Plus – EBS Plus Will Pin Point The Pin that is at fault, Pins 1 to 7

With the latest electronics technology and a redesigned PCB, this ISOCheck has the ability to move forward with trailer technology and future truck & trailer brake systems.

ISOCheck Pricing

ISOCheck – ABS – £139.00

ISOCheck – EBS – £149.00

ISOCheck EBS Plus – £199.00

All plus carriage & VAT.

Contact aide automotive for any questions via email – info@aideautomotive.com or phone 0115 8456471

ISO Electronic Brake System Tester is the latest addition to the ISOCheck product range