Archive

Posts Tagged ‘EBS/ABS Sensor Master’

Fresnel Lens / Truck Anti Siphon / Sender Unit Safe / Sensor Master Purchase Online

August 26th, 2019 Comments off

It’s Bank Holiday At #aideauto But You Can Still Purchase Any Of Our Top Sellers! #fresnel #lens #Truck #Anti #Siphon #SenderSafe #Sensor #Master. Visit the aide automotive Shop To Buy Or @ #eBay Have A Great BH!

Truck Fresnel Lens PVC
The Fresnel Lens is a clear, thin, flat plastic lens that is press fitted to a truck’s passenger door window.

Due to a blind spot, drivers of trucks cannot see smaller vehicles or other vulnerable road users which are immediately next to the passenger side door of their HGV. These unseen road users can be hit if the truck changes lane in their direction.

Truck Fuel Tank Sender Protection
Sender Safe is a new product to help with fuel security around a Truck Diesel Fuel Tank.

Sender Safe is a robust and easy to fit protective shield for a Truck Fuel Tank Sender unit, increased protection of the fuel tank filler entry by fitting anti siphon devices has meant the Sender Unit is now the way to steal fuel.

The Sender Safe unit sits on top of the fuel tank attached by the fuel tank mounting straps, Sender Safe prevents access and damage to the Fuel Tank Sender Unit.

TP UltraPlus – Anti Fuel Theft Device
TP UltraPlus is a high quality Truck Anti Fuel Theft device that helps to prevent the Fuel Theft from commercial vehicles.

This device is simple to fit, taking no more than a few minutes, with no drilling or gluing to a fuel tank.

TP UltraPlus can be fitted to all types of tank: bayonet, screw type & bus /coach.

Truck Manufacturers include, Volvo, MAN, DAF, Iveco, Scania, Renault, Foden, Hino & Mercedes

EBS ABS Sensor Tester
The EBS ABS Sensor Tester is one of aide automotive’s best selling products.

Any workshop requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

#diesel #automotive #repairs #hgv #theft #abs #transport #servicing #diagnostics #stolen

Contact aide automotive on 0115 8456471 or email shoponline@aideautomotive.com

 

Our Top Sellers! #fresnel #lens #Truck #Anti #Siphon

Purchase Online Fresnel Lens / Truck Anti Siphon / Sender Unit Safe / Sensor Master

aide automotive offer a range of products to help with DVSA Guide Roadworthiness

August 17th, 2017 Comments off

CV Traffic Commissioners Review & Advice

Read Some Highlights OF TC’s Annual Report for 2015-16

Recently reported in the Transport Operator, the seven traffic commissioners (TCs) of Great Britain have released their annual report for 2015-16, highlighting a broad range of transport compliance and enforcement issues identified during the course of the year, and their priorities for future progress.

The commissioners, who preside over the eight regional traffic areas, identified key concerns with regard to operator compliance, driving and maintenance standards, as well as problem areas for the authorities themselves to tackle in order to improve the services they offer.

TC Richard Turfitt, who oversees the largest traffic area, in the east of England, said he made little apology for “sounding like a broken record” when it came to vehicle inspections.

“As DVSA estimates that half of MoT fails could be avoided by checking that light-bulbs work, the condition and pressures of tyres and that mirrors, wipers and washers work, there is further work to do,” he said.

“I am appalled by the number of operators who have not even checked whether their inspection sheets are up to date by reference to DVSA’s Guide to Maintaining Roadworthiness.

“In the space of two weeks, two unconnected operators appeared before me suggesting their vehicles were being inspected against safety standards from 1972.”

aide automotive market a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.
With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss
For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing.
EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
aide automotive offer a range of products to help with DVSA Guide Roadworthiness. Contact us via our website www.aideautomotive.com
Brake Tester, Diagnostics, Battery Testers

aide auto Market Truck & Trailer Workshop Test Tools

aide Introduce a PayPal Online Shop For Products & Accessories

July 12th, 2017 Comments off

Commercial Vehicle Product Online Shop

aide Introduce a PayPal Online Shop For Products & Accessories

aide automotive have moved forward with a refresh on the websites category pages with the addition of a Online PayPal SuperMarket.

The Online SuperMarket can be found from the homepages navigation bar toward the top of the homepage, simple to use the shop utilises PayPal as the payment merchant. With the option to buy single or multiple items with ease, the SuperMarket will keep growing as new products are introduced or updates become available.
At present the Bowmonk BrakeCheckEBS/ABS Sensor Tester, TrailerCheck, TestaTow, Susie Easy Grips, Truck Anti Siphons, Truck Fresnel Lens, Truck 5th Wheel Lube Liner ISOCheck‘s are available now.
Further exsisitng products will be added soon, but to see all products available please click on aide automotive’s Online SuperMarket.
If you prefer to purchase with the personnel touch, please do not hesitate to call us on 0115 8456471, we accept cards as an alternative to PayPal.
Purchase A Bowmonk BrakeCheck Online

Online PayPal Purchase @ aide automotive

ISOCheck tests a trucks ISO7638 Socket

May 19th, 2017 Comments off

aide automotive launches improved ISOCheck

EBS ISOCheck Now Available In Addition To the ABS ISOCheck – Review Products Details & Buy Online

Commercial Vehicle Equipment Supplier aide automotive Has Launched An Updated Version Of The ISOCheck

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

 

The latest iteration of the system – ISOCheck EBS – has been designed to test electronic braking systems incorporating a CAN line test.

“Trucks that were first used on or after 1 May 2002 must be fitted with A ISO 7638 connection,”

“If a truck is fitted with an Electronic Brake System, and is also towing a trailer that is fitted with EBS, then a 7-core cable must be used.

Like the ISOCheck ABS tester, ISOCheck EBS tests the ISO Socket 7638 pins 1 to 5, but also tests pins 6 and 7, the EBS CAN lines.

Alongside the standard ABS & EBS ISOChecks we can also offer a diagnostic EBS ISOCheck.

ISOCheck EBSPlus test pins 1 to 7, and identifies the exact pin at fault.

Once the initial power test is complete with a RED fault light, the ISOCheck will then go into diagnostic mode and flash a count sequence in relation to the faulty pin,

The ISOCheck product range has benefited from a complete redesign, incorporating the latest electronics technology which enables future proofing truck and trailer brake systems.

ISOCheck can be used to test all Wabco, Knorr-Bremse and Haldex systems, from the early generations to the latest.

Testing is simple and easy,

ISOCheck can be used in many ways: fault-finding by the roadside or as an inspection sheet test within a workshop.

ISOCheck really becomes the perfect test tool on a dark wet night. The quick test and the bright (GREEN) OK / (RED) FAULT indicator increases test and repair efficiency.

The system can also be used continuously between a unit and trailer as a constant visual aide.

To purchase the ISOCheck product range via our online PayPal shop – Click On Purchase ISOCheck Now!

More From Matthew Burke on 0115 8456471 or matt@aideautomotive.com

 

ISO7638 Truck Tester

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

Truck ISO Tester Starts To Sell!

May 4th, 2017 Comments off

ISOCheck Re Launch & New User Guide

The ISO tester is an advanced circuit tester, it tests a trucks ISO 7638 socket, trailer susie and ABS/EBS functions.
With the launch now well under way, we can detail here the latest user guide.
When using the ISOCheck on a tractor and trailer, please make sure all health & Safety procedures are in place.
The ISOCheck is a test product & a diagnostic tool, the test lead will quickly identify where the fault is .i.e. on a tractor unit, a trailer or the existing Susie lead.
Testing a Tractor Unit
Firstly make sure the ignition is off in the tractor unit, remove the existing Susie lead that is fitted into the ISO socket.
Apply the ISOCheck to the ISO7638 socket on the tractor unit, fit the end with the clear Perspex modification, for future reference this is called “the ISOIndicator”.
Turn on the ignition, with all voltages and earths correct and also the ABS warning light “off” the ISOIndicator will light up GREEN.
If any of the voltages, earths or the warning light circuit is faulty, then the ISOIndicator will light up RED (or warning light on), this indicates a fault with the tractor unit, with the EBSPlus version the lead will now go into diagnostic mode and flash a count sequence in relation to the pin that is at fault. i.e. 5 flashes indicates PIN 5 “the warning light control wire”.
If the ISOCheck Truck Test resulted in Green and to confirm the trailer has a fault, not follow the trailer test procedure.
Testing the Trailer
Turn the truck ignition off.
Plug the ISOCheck Indicator into the trailer, turn on the ignition. The trailer warning light should activate on the truck dash board and the ISOCheck will light up RED.
The warning light should go out after 2 seconds and the ISOCheck will go GREEN, this means the trailers braking system is working at standstill.
If the warning light stays on, then drive the tractor and trailer above 10KPH, the warning light should go out and the ISOCheck will go GREEN. This proves the braking system is working correctly.
If all is working correctly and there is still an ABS fault light, this would mean the existing Susie lead is probably faulty. If the tester stays RED after a drive, stop the unit and trailer and remove the ISOCheck from the trailer. If the tester stays RED there is a power supply fault from the tractor unit or warning light fault, if the ISOCheck Indicator goes GREEN then there is a fault in the trailer system.
Contact aide automotive for any questions via email – info@aideautomotive.com or phone 0115 8456471
EBS & ABS Trailer Test

ISOCheck Is a Electrical Truck Brake Tester

Tester Clears ABS Faults Trucks Trailers Bus Coach

December 1st, 2016 Comments off

ABS Tester For Bus & Coach

The EBS/ABS Sensor Master is an easy to use device which will confirm each EBS/ABS sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The Master also tests the exciter ring and the distance between the ring and sensor.

Problems with EBS / ABS systems fitted to Coaches and buses, are best diagnosed via a vehicle’s Electronic Control Unit (ECU). However, since 80% of all EBS / ABS problems are sensor related, by connecting to the sensor socket on each wheel, you are, in effect, taking the quickest and most direct route.

The exciter ring is a critical part of an ABS system on a truck or trailer. Exciter rings are open to the elements and likely to corrode or suffer damage from road debris. Whatever the cause of damage to the ring or the disc itself may still have plenty of life left in it. By diagnosing that the problem is the exciter ring not the brake disc, workshops can save operators unnecessary costly repairs.

ABS and EBS systems use exciter rings for a wheel sensor to produce a voltage so the ECU can establish if the wheel is turning or not. The EBS/ABS Sensor Tester is an easy to use device which will confirm each sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The EBS/ABS Sensor Tester tests the exciter ring and the distance between the ring and sensor.

Full vehicle diagnostic kits can cost a workshop thousands, however at only £245 (+VAT) the EBS/ABS Sensor Master is an economical solution saving money for both the business and the customer.

The EBS ABS Sensor Tester is one of aide automotive’s best selling products!

Click on ABS/EBS Sensor Master for more details or call aide automotive on 0115 8456471

 

Sensor master Exciter Ring EBS Tester

ABS Tester For Bus, Truck, Trailer & Coach

Trailer Diagnostic Tester 24 volt

January 15th, 2015 Comments off

Trailer Diagnostic Tester 24 volt Live Demo By Whiteline Services

Following the purchase of a TrailerCheck 4 Vans By Wycombe based trailer inspection and repair company Whiteline Services, Owner Daniel Bryant has filmed the 24 volt trailer light tester in operation.

Daniel says “Working within a truck dealership for many years, i saw the need to to offer an on site inspection and trailer repair service. With this i had no hesitation in investing in the TrailerCheck 4 Vans & Code Talk Trailer Diagnostics. The product is ideal for me to prove the service we supply in professional & safe. Working with aide automotive has been a breeze and i am sure we will work further on products and media showcasing.”

The Trailer Air Brake And Light Tester is an intelligent unit and has the capability to power multiple trailers without the inconvenience of continually recharging external batteries.

EBS Trailers can be tested for CAN line integrity, a quick and simple test to confirm the CAN lines.

To see further details of the Trailer Light & Air Brake Tester click on TrailerCheck.

Also feel free to call aide automotive on 0115 8456471 to enquire.

 

Trailer Light Tester to Test 24 Volt Trailers

Trailer Diagnostics for East Midlands Bulk Freight Company

Trailer Sensor Brake Tester

June 25th, 2014 Comments off

EBS/ABS Sensor Master Order Receives Praise

Tested the EBS ABS Sensor Tester and it is an impressive piece of kit!

The EBS ABS Sensor Tester is the ideal tool for any user, from an apprentice to a time served fitter, or a busy workshop. Quickly identifying and clearing the fault can save time and money, rather than calling in a dealer or diagnostic expert.

“The order arrived as promised. We have tried out the EBS Sensor Tester and it is an impressive piece of kit. Many thanks for your prompt service.” stated Neil Robinson Tyson Haulage

To read more and download a PDF product brochure click on Trailer Sensor Tester.

Call aide automotive on 0115 8456471.

 

Truck Trailer ABS Sensor Master

Sensor Tester for ABS or EBS

Truck ABS Sensor Master

February 19th, 2013 Comments off

aide automotive knows that workshops requires fast, accurate and effective tools to diagnose faults easily and quickly. A high percentage of brake EBS/ABS faults are around the sensor or the sensor itself.

The EBS/ABS Sensor Master is an easy to use device which will confirm each EBS/ABS sensor is operational and effective. By connecting to the sensor socket on each wheel, individual sensor faults can easily be identified. The Master also tests the exciter ring and the distance between the ring and sensor.

The Master is the ideal tool for any user, from an apprentice to a time served fitter, or a busy workshop. Quickly identifying and clearing the fault can save time and money, rather than calling in a dealer or diagnostic expert.

Using the Sensor Tester to check a sensor, the gap and exciter ring Royal Mail found they were able to easily and cost effectively repair warning lights faults on trucks and trailers without the need for expensive diagnostics tools or dealer trips.

aide automotives sales director said “The ABS Sensor Master has been an excellent product for cost effective ABS repairs of trucks and trailers for many years, I recall customer comments of this ABS test tool saving thousands in dealer fees and quick repairs with the vehicle quickly back on the road.”

To purchase a ABS Sensor Master please call 0115 8456471.

 

Truck Trailer ABS Sensor Master

Sensor Tester for ABS or EBS

Truck And Trailer ABS Flash Codes

May 31st, 2012 Comments off

KNOW YOUR DIFFERENT ABS FLASH CODES FOR DIFFERENT MAKES OF SYSTEM

There are always two, possibly three, ways to power up the ABS system and you should know what to expect regarding light function. If an ABS/EBS cable is fitted then the GREEN headboard monitor lamp should be ignored and only look at the in-cab RED dashboard light. (The trailer light may not work at all with the ISO7638 connected)

STATIONARY TRAILER HEAD BOARD LAMP FUNCTION WHEN POWERED ONLY BY 24N STOP LIGHTS (REMOVE ALL OTHER CABLES)

ABS ECU

MAKE & MODEL

STOPLIGHT POWER UP LAMP

LAMP AFTER 2 SECONDS

LAMP AFTER 4 SECONDS

DOWN ROAD <10KPH LAMP <10 KPH FAULTY IF LAMP
HALDEX/GRAU MGX 1 & 2

ON

OFF

OFF

OFF

ON

HALDEX/GRAU

MGX 2E

ON

ON

ON

OFF

ON

HALDEX/GRAU

MGX 100

ON

OFF

ON

OFF

ON

HALDEX/GRAU

MODAL

ON

OFF

ON

OFF

ON

HALDEX/GRAU

MODULAR 1/1+/2

ON

OFF

ON

OFF

ON

WABCO VARIO C BOXER

ON

ON

ON

OFF

ON

WABCO

VCS 2S/2M

ON

ON

ON

OFF

ON

BENDIX/KNORR

AL4T

ON

OFF

OFF

OFF

ON

KNORR-BREMSE

KB A18

ON

OFF

OFF

OFF

     ON**

KNORR-BREMSE EBS TEBS 4

ON

ON

ON

OFF

ON

 

The in-cab dashboard warning light will only work when the ABS Susie (ISO7638) or, in some cases, the 24S is connected. The lamp sequence will mimic the trailer headboard warning lamp when the ignition is turned on (NOTE: NO NEED TO PRESS FOOT BRAKE PEDAL)

** The first time after fitting a new ECU, this sequence is different until the vehicle has been driven above 30kph and the brought to a halt for dynamic sensor check. After this it should function as shown in table.

·         24Normal – ISO 1185

·         24 Supplementary – ISO3731

·         ABS/EBS – ISO7638

aide automotive ltd offer trailer light testers and ABS / EBS sensor testers for truck and trailer diagnostic repairs.