The Automotive Blog

Auto Braking System Install On Trustseal Ltd Road Sweeper – Day 1 !

So the Road Sweeper from Trustseal Ltd has arrived on time.

First job is the vehicle inspection, all good apart from a small bit of damage to where the sensor is installed, no problem for us! A small repair job to strengthen and flatten the panel to offer a reliable, strong mounting place.

Over the next few days the Auto Braking System will be installed with updates to follow.

Contact aide automotive on 0115 8456471 to enquire further about the CV Vehicle Back Stop Auto Braking Reversing System.

Contact aide automotive to discuss HGV Fuel Protection on 0115 8456471 or info@aideautomotive.com Our product range – HGV Brake Testers – Caliper Pot Tester – Trailer EBS Testers – HGV Truck Trailer EBS / ABS Sensor Tester – Truck /Trailer Diagnostic Tools – Midtronics Battery Testers – Anti Siphon Devices – ISOCheck – Trailer Locks – Auto Braking Reversing System – HGV Diesel Tank Alarms – Plus More

Bowmonk BrakeCheck has been approved as a MTS CONNECTABLE DEVICE

BrakeCheck MOT Decelerometer is one of the first decelerometers to get the MTS Connectivity approval from the DVSA.

A big advantage of connected MOT equipment will be the time it saves MOT garages. Instead of a tester carrying out a test, noting down the result, then entering it manually, it will be recorded instantly.

The time saved per test won’t be massive – we think it should save you a couple of minutes per test – but when you do hundreds of tests a year, the savings will add up.

Using this equipment gives MOT garage more accurate results, direct onto the MTS System making it quicker for MOT testers and customers alike; both critical factors in our business success. Said Ian Wills, the authorised examiner designated manager (AEDM) for the site at Deptford where testing & research has taken place.

Bowmonk’s technical team have been working with the DVSA on connecting the decelerometer BrakeCheck directly to the MOT system in order to reduce errors and save time. In the long term, this will help to reduce or eliminate the number of incorrectly entered results, as well as stopping incorrectly entered vehicle identification numbers (VINs) and mileage.

aide automotive market & sell the Bowmonk BrakeCheck, Purchase Online Now or Via Our eBay Listing  – Search on eBay ” MOT Garage Back UP Bowmonk Brake Tester Decelerometer ”

Bowmonk MOT Calibration Check

The Old Mechanical Brake Tester Tapley Now Retired As DVSA Say A Print Out Required

For almost 100 years Tapley brake testers have been the market leading portable brake testing equipment.

Results of Tapley Brake meter tests have been accepted as evidence of braking efficiency in Courts of Law throughout the world.

But now it seems the Tapley Brake Tester may well be retired in the UK, recent guidance from the DVSA now says a brake test must be printed for inspection records.

Decelerometers have moved on significantly from the old mechanical brake testers such as Tapley Decelerometer. Being electronic BrakeCheck has a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

Contact aide automotive to discuss the recent DVSA brake testing guidance and BrakeCheck. – Call 0115 8456471

MOT Tapley Brake Meter

How to Use A Decelerometer For Trailer Brake Tests

Trailer maintenance requires to be as professional as truck maintenance, Carrying out a inspection brake test on trailer doe not mean an expensive Roller Brake Test.

Research has concluded that using a product like BrakeCheck to test trailers brakes is beneficial but will not indicate a below par efficiency on a particular wheel or brake, although using an Infra Red Thermometer as well will increase your awareness of a faulty brake or a low efficiency brake.

VOSA’s Mark Pattison has stated “A decelerometer is not the ideal method to test the braking of a vehicle and trailer combination. However it is of some use. You are correct that the checking of individual wheels would not show up in a test result. The way to use a decelerometer is to first test the drawing vehicle on its own. Then connect the trailer and the deceleration rate should be similar i.e. the trailer is doing its fair share of work. This is not an exact science but would be enough to give you confidence the trailer brakes were working.”

This system is ideal for commercial operations to improve maintenance records for trailers and increase awareness of a trailers brake performance between the annual roller brake tests. Offering a print out of the combination tractor and trailer performance with brake temperatures will improve quality procedures and health & safety paper work. It is often said in today’s age paper work to protect directors and managers from the corporate manslaughter or health and safety law is essential.
aide automotive have designed an inspection sheet for trailers using the BrakeCheck and thermometer, if you require a copy email info@aideautomotive.com with subject heading Trailer Inspection Sheet.

aide automotive also recommend to test the pressure on brake chambers, this will increase your past rate for trailer parking brakes.

To discuss trailer brake testing further call aide automotive on 0115 8456471.

aide automotives Brake Efficiency Tester BrakeCheck is the ideal way to test vehicle brakes.

VOSA are continually advising operators, commercial repairers and in house workshops to complete regular inspection sheet brake test.

Being electronic there is a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

BrakeCheck can be used and is accepted by VOSA for many vehicles, in the commercial sector VOSA approve BrakeCheck for testing all commercial type vehicles on every inspection. Within the MOT centre this device is used as back up to the roller tester but used in principal on 4×4 vehicles.

Gary Moir of MSK Waste said ” Using a Brake Efficiceny Tester such as a BrakeCheck has saved this company hundreds of pounds as taking vehicles to rollers testers for an inspection brake test is unecessary.”

Contact aide automotive for a Brake Efficiency Tester question by clicking on BRAKE EFFICIENCY 

Brake Tester Uisng Brake Efficiency to Report On Truck Brakes

BrakeCheck 2 Year Warranty!

aide automotive are now pleased to offer a two year warranty on all BrakeCheck’s & Accessories

aide automotive have improved our customer service by increasing the warranty from 1 to 2 years on the BrakeCheck family & accessories!

BrakeCheck is the number one brake tester for commercial vehicle inspections sheets and with over 13,000 testers sold BrakeCheck is now the number one reliable tester on the market.

Matthew Burke Sales Director Said “Since the launch of BrakeCheck in 2001 we have been continually looking at way to improve the tester for reliability and operational, with BrakeCheck Series 2 we now have the over whelming confidence to offer a two year warranty, operationally the BrakeCheck product is at the very top of its product sector and now we feel its top for reliability.”

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is VOSA & MOT approved.

If you have any questions on why a BrakeCheck is used on commercial vehicles or within the MOT test station please click on Brake Tester to enquire or phone 0115 8456471.

Brake Faults Most Common At the Roadside, says VOSA
Defective braking systems and components top the list of reasons for prohibitions issued by VOSA at the roadside and depot checks last year.

Nine percent of prohibitions for trucks and 20 percent of prohibitions for trailers were issued because of defective brakes.

The use of a regular deceleration test such as a BrakeCheck could help reduce brake faults and keep inspection sheet paper work in order.

BrakeCheck (decelerometer) can be used and is accepted by VOSA for many vehicles, in the commercial sector VOSA approve BrakeCheck for testing all commercial type vehicles on every inspection. BrakeCheck can be used on vehicles such as, fork lifts, construction / quarry vehicles, tractors and trailers.

This device has moved on significantly from the old mechanical testers such as Tapley Meters. Being electronic there is a much higher accuracy and additional information such as average deceleration, a left/right pull measurement, speed at braking and stopping distance. All tests are time and date stamped.

aide automotive ltd are a leading supplier of brake testing devices for Truck Inspections sheets Brake Tests.

Click on DECELEROMETER to enquire how a BrakeCheck can help you.

January has seen a good start to BrakeCheck sales for aide automotive.

Since the return after Christmas and New Years holidays enquirys and orders have been flowing for us, BrakeCheck is ideal for any truck operator to carry out an inspection sheet brake test with ease or at a cost effective manner. says Matthew Burke of aide automotive ltd.

BrakeCheck is a portable battery-powered device that can be used by vehicle workshops, government traffic authorities, testing and inspection stations to test and report on vehicle brake efficiency. BrakeCheck is VOSA & MOT approved.

If you require an inspection sheet brake tester for your trucks or trailers call aide automotive ltd on 0115 8456471 or click on www.brake-tester.co.uk to read more or contact us.

BrakeCheck the UK’s Number 1 MOT Brake Tester (Decelerometer) is in the aide automotive’s January Sale !!
Used as a back up to the roller tester the BrakeCheck is an electronic tester that can be used to test vehicles that cannot go on the rollers or Quad, Trike bikes and Motorcycles.
Each MOT Garage requires a back up brake tester and aide automotive would like to offer this great deal to those who don?t have a tester or require upgrading their old mechanical meter such as a Tapley. Having the latest tools within the garage will be of benefit when VOSA carry out inspections.
BrakeCheck is easy to use and can also be downloaded to a PC or connected to a supplied printer for hard copy test reports at an optional cost, also for motorcycles a mounting clamp is required.

In the last year we have also seen garages part exchange the Auto Stop Mini, this is an electronic tester supplied by Tecalemit. As this tester is expensive to recalibrate and by reports hard to use, part exchanging to the BrakeCheck should pay back within 2 years.
To read more click on BrakeCheck for the main website page or click on www.brake-tester.co.uk for the dedicated website.

If you would like to purchase a BrakeCheck then call 0115 8456471 or send an email to shoponline@aideautomotive.com and we will call you back.

Dear Sir /Madam,

It has been 24 months since your BrakeCheck was calibrated.

With all tools in your workshop, you need to know they are working correctly and in test situations supplying the correct information. With this, we advise that your BrakeCheck is recalibrated.

We will aim to complete the recalibration of your BrakeCheck within 48 hours of receipt of the unit.

Option 1 – BrakeCheck Recalibration (ONLY)

All prices exclude VAT.

For BrakeCheck recalibration (ONLY), you will need to return the BrakeCheck only.  Please note chargers, cases, printers are not required.
It is suggested that you use a royal mail recorded delivery service / special delivery or courier to ensure that the unit(s) reach us safely.

Returns address: –
aide automotive Limited
Service Dept
Foxhall Business Centre
Foxhall Road
Nottingham, NG7 6LH

Option 2  – BrakeCheck recalibration with Service and test

For BrakeCheck recalibration, service and test, you will need to return your BrakeCheck, Printer, Chargers.
It is suggested that you use a royal mail special delivery service or courier to ensure that the unit(s) reach us safely

Returns address: –
aide automotive Limited
Service Dept
Foxhall Business Centre
Foxhall Road
Nottingham, NG7 6LH

Please be so kind as to provide a full postal address for your return and a purchase order number and invoice address?

If you have any questions, please feel free to call the office on 0115 845 6471.

Many thanks

Matthew Burke
aide automotive ltd
Tel 0115 8456471
Fax 07092 311470
Mobile 0787 6653609
www.aideautomotive.com
Address – Foxhall Business Centre – Foxhall Road – Nottingham – NG7 6LH
All orders are subject to aide automotive ltd business terms & conditions, copies supplied upon request.