Archive

Posts Tagged ‘ABS Trailer Tester’

Do You Know What Brake Testing You Should Be Doing?

June 19th, 2019 Comments off
Since April 2014 the DVSA have been recommending commercial vehicles undertake 4 brake tests per year!

This is a recommendation based on the DVSA’s guidance paper.

So as this is a recommendation, what is the law? Is the law is one RBT as a MOT per year?

Well it is if the DVSA is a guidance paper, or is it?

If the guidance set out by the DVSA isn’t followed and the operator is inspected by the DVSA or addressed by a traffic commissioner. The guidance set out by the DVSA is used as the standard an operator should meet, does this now make it law?
Well the operator has to make this call; do you follow the guidance or not? Keeping a fleet roadworthy and safe must be a high priority for any management team, after all the with laws around corporate manslaughter all risks need to be seriously considered.
Many operators have moved with the guidance but still 5 years has passed with some commercial vehicle operators still unaware of the law and guidance.

So, regarding commercial vehicle brake testing, the guidance states:

Document :Guide to maintaining road worthiness
Commercial goods and passenger carrying vehicles (Revised 2014)

Section 5: Safety inspection and repair facilities

Extract –
“Therefore, it is normally expected that the vehicle or trailer should complete at least three successful brake efficiency tests spread throughout year in addition to the annual MOT test.”

An operator can take the decision to carry out brake tests using roller brake tests or a decelerometer.

As the consequences of non-compliance with the required standards can be very severe and include prohibition, fines or prosecution, operators are advised to ensure that they are familiar with all the changes within the DVSA guidance.

Following The Bath Tipper Incident Inquiry, HGV Brake Testing is Essential!!

The inquiry showed the Bath tipper truck to have been poorly maintained which resulted when tested to have a very poor brake efficiency.
aide automotive recommend the use of roller brake testers and decelerometers within a 12-month maintenance and testing policy.

Also, the use of an Infra-Red Temperature Gun, Infra-Red Temperature guns are an excellent way of individual brake testing of wheel disks or drums to determine brake activation. With the ease of just pointing the Infra-Red Light at the wheel hub from the outer edge of a trailer or truck and without removing wheels, an infra-Red Temp Gun can indicate if a wheel is not braking efficiently as compared to the other wheels on the vehicle.

aide automotive market a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.

With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss. For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing. EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
aide automotive offer a range of products to help with DVSA Guide To Roadworthiness. Contact us via our website www.aideautomotive.com
HGV DVSA Truck Brake Tester

 

Brake Tester, Diagnostics, Battery Testers

aide auto Market Truck & Trailer Workshop Test Tools

Commercial 24 Volt Trailer Tester Van Installation

December 8th, 2017 Comments off

MT Globex Contract aide To Install TrailerCheck To Fleet Van

MT Globex is a West Midlands company that is strategically located at the heart of the UK’s motorway network, further supported by several partner depots across the UK.
MT Globex’s modern, highly maintained fleet of vehicles ensure that all their distribution operations are vastly efficient for customers with a minimal environmental footprint. Due to cutting edge, industry leading satellite tracking technology combined with fully trained transport planners with a wealth of transport knowledge, MT Globex ensure the fleet is fully utilised and thereby reducing empty mileage.
With a fleet of trailers to maintain MT Globex reviewed the TrailerCheck 4 Vanselectrical and diagnostics trailer tester as a tool to improve on trailer inspections and repairs.
Deciding to purchase the trailer tester, the next questions was: How and where shall we install the TrailerCheck in our van?
Consulting aide automotive, MT Globex decided the contract the install of the TrailerCheck to aide, utilising our experience and knowledge of best practice.
Fitting the TrailerCheck and associated accessories, MT Globex asked: Can you install the compressor as well? YES we can !
The install was completed at our workshop (on site installs also available) in one day.
If your trailer maintenance van needs a professional trailer tester with a professional install, contact aide automotive for a quote.
14 Volt Trailer Brake Tester

Commercial 24 Volt Trailer Tester Van Installation

Truck ISO ABS / EBS Susie – What Is It?

November 29th, 2017 Comments off

Faulty ISO7638 Line Can Cause Fatal Accidents

Some drivers aren’t aware of the role Of the ISO ABS / EBS Susie!

aide automotive have seen recent reports in the media of articualted truck drivers knwloedge of the ISO 7638 Susie.
We offer credit to the below article to Don Bur Ltd.
There is disturbing evidence to suggest that some drivers aren’t aware of the role and critical importance of the ABS ISO7638 line for articulated trailerswhilst in transit or, more worryingly, are deliberately leaving it disconnected.
The use of the ABS ISO7638 line (otherwise known as the EBS/ABS line) became law in May 2002 where the tractor and trailer are both provided with connections.
The EBS/ABS ‘Suzie’ connection provides electrical and data feeds to the trailer’s ECU or ‘brain’. The ECU then controls the anti-lock braking system (ABS), load sensing (LSV), roll stability (RSS) and suspension control which regulates the correct trailer ride height and, in turn, the overall trailer height.
So why then might a driver leave it disconnected? There are, surprisingly, a couple of reasons. Firstly, the roll stability system (RSS) automatically applies the brakes if the trailer is going too fast round a bend. This has an impact on both speed and fuel economy and, if a driver is either in a rush or targeted against fuel consumption, they might be tempted to disable this ‘inconvenient’ feature.
The other apathetically induced reason is that it just “doesn’t seem to do anything”. Indeed, when the driver pulls away, his/her brakes and lights will appear to work. What the driver may not understand is that they are more likely to experience jack-knifing, aquaplaning, brake lock, rollover, bridge strike and, more commonly, the fact that the 44T rig just won’t be able to stop as quickly when trying to avoid that pram that’s just peeked out from a line of parked cars.
So, just in case there is any lingering doubt, failure to connect the ABS ISO7638 line correctly results in the risk of catastrophic, life-threatening accidents. If the driver fails to use the line/ ‘Suzie’ correctly and there is a collision in which someone is killed, then the driver can face a charge of manslaughter.
aide automotive market a ISO7638 cable with fault indicator, so as well as having the cable correctly connected a driver can also be notified of any faults within the system. Again an electrical fault could have the same catastrophic effects as the ISO Susie cable being non connected.
ISOCheck lights bright RED when a fault is identified, if good to go the ISOCheck is continually lit bright GREEN.

ISO7638 Truck Tester

ISOCheck tests a trucks’ ISO sockets in order to help identify ABS or EBS faults.

80% Of Commercial Vehicle Brake Faults Cleared By Sensor Master

November 7th, 2017 Comments off

CV ABS & EBS Brake Repairs Made Easy!

The Sensor Master Clears 80% Of Commercial Vehicle Brake Faults

As the air braking world has changed, we have had to adapt the way we deal with diagnostic problems that can arise on our customers vehicle systems. As the air signalling system has been fazed out and replaced by the EBS / ABS system we have endeavored to keep up with the advancements in the technology and created our own range of testing equipment.
Our engineer is constantly updating the test equipment to match the needs that arise from his service visits, so are perfectly tuned to the EBS / ABS components that we supply.
Our test devices can be used in conjunction with the OE manufacturer’s testers to create a complete analysis structure for truck and trailers that is not only easy to use but also affordable to all sizes of fleet maintenance from owner / driver to multi fleet service garages.
Since 80% of all EBS / ABS problems are sensor related (Reported By Knorr Bremse & Wabco), by connecting to the sensor socket on each wheel, rather than the ECU, in effect, taking the quickest and most direct route, by going straight to the heart of the problem.
The Sensor Master DRA08 is a handheld EBS / ABS sensor and exciter ring tester, for use on trucks, trailers, and buses.
Lightweight and portable, the EBS /ABS CV Sensor Tester comes supplied with two 1.6m high quality cables, a sturdy carry case, short introductory printed manual, and a single 9V battery – everything, in fact, needed to use it straight out of the box.
Designed with ease of use in mind, the Commercial Vehicle ABS EBS Sensor Testertakes minutes to set-up, and, once connected, undertakes a complete test cycle of the six most common causes of EBS / ABS faults, at the touch of a button, in just 15 seconds – a fraction of the time it would take to perform the same tests manually.
Contact aide automotive to purchase this cost effective easy to use tester or buy online at our aide Online PayPal Shop.
Commercial Vehicle ABS EBS Tester

Truck ABS Faults Easily Found With Sensor Tester

Electronic Brake System (EBS) Trailer Testing With ISOCheck

October 11th, 2017 Comments off

What Is The ISO EBS Truck & Trailer Lead

How does the EBS truck & trailer Susie lead work?
Everyone seems to have there own ideas how it works, ranging from; “if it’s not plugged in your trailer brakes wont work”, & “it’s only a back up power anyway”
Both are incorrect!
The truth is…
The Electronic Braking System (EBS) Susie or the ISO 7638 (its correct name) is essential for the trailers Electronic Braking System (EBS) to operate correctly.
So, if a truck has an ISO7638 socket a tractor and trailer must be connected with an ISO7638 Susie and the EBS must be working correctly!
Also this means the EBS warning light the truck operator should be checking is in the cab and not the one on the trailer headboard (if there is one).
This is where the problems start, how does the EBS lead actually work, well this is how:
Pin 1 in most trucks is permanent live
Pin 2 is switched ignition live
Pin 3 is common return to battery negative
Pin 4 is common return to battery negative
Pin 5 is the warning light control (positive)
Pin 6 is “CAN” High
pIn 7 is “CAN” Low
Pin 5 which is the warning light control wire, this pin seems to be continually misunderstood. Some people think pin 5 is controlled by the trucks EBS system or even by the truck itself, both of these are incorrect, how it works is quite simple, a basic explanation is detailed below:
Power from the truck battery routes to a fuse, then to the ignition switch and then to the warning light in the dash board, finally then to pin 5 in the socket.
When an EBS Susie ISO7638 lead is connected to the trailer the trailer EBS system sees 24 volts down pin 5, which and then reduces that voltage inside the trailer ECU to below 5 volts (earth) which then activates the EBS light on in the truck cab.
Once a truck & trailer is in motion and the the trailer EBS system is happy with the wheel speed signals, the ecu then raises the voltage back up to 24 volts and the warning light in the cab goes out, if a fault appears when a truck & trailer is on the road, the ecu lowers the voltage again activating the In Cab Warning Light.(Please Note This Is a Basic Description).
An easy way to test the truck & trailer ISO Connection socket is the ISOCheck
The Electronic Braking System (EBS) Susie or the ISO 7638

What Is The ISO EBS Truck & Trailer Lead?

Agricultural Trailer Tester Includes ABS Warning Light Test

September 28th, 2017 Comments off
Agricultural Trailer Tester Now includes Brake warning light test!
aide automotives Agricultural Trailer Tester “TestaTow” can now test the tractor cab brake warning light. For those agricultural trailers operating the more modern brake systems with a dedicated ISO line, TestaTow will mimic the brake systems warning light to confirm the system is operational or not.
Agricultural Trailer Tester, TestaTow is the professionals choice, portable and well constructed the 12 Volt TestaTow quickly tests any trailer without the need of a vehicle or battery. No more carrying car batteries around and DIY wire connections, TestaTow is built in a ergonomic housing .
With TestaTow also offering a bad earth test and a full lighting test, this tester is probably the best Towing tester around.
For those operators or repairers that may not want to test the ABS warning light, Agricultural Trailer Tester, TestaTow can be purchased with or without the ABS warning light test.
Contact aide automotive via email info@aideautomotive.com or by phone on 0115 8456471
Agri TestaTow - tests modern agricultural trailers

Agricultural TestaTow has the added feature of an ISO ABS warning light test

aide automotive offer a range of products to help with DVSA Guide Roadworthiness

August 17th, 2017 Comments off

CV Traffic Commissioners Review & Advice

Read Some Highlights OF TC’s Annual Report for 2015-16

Recently reported in the Transport Operator, the seven traffic commissioners (TCs) of Great Britain have released their annual report for 2015-16, highlighting a broad range of transport compliance and enforcement issues identified during the course of the year, and their priorities for future progress.

The commissioners, who preside over the eight regional traffic areas, identified key concerns with regard to operator compliance, driving and maintenance standards, as well as problem areas for the authorities themselves to tackle in order to improve the services they offer.

TC Richard Turfitt, who oversees the largest traffic area, in the east of England, said he made little apology for “sounding like a broken record” when it came to vehicle inspections.

“As DVSA estimates that half of MoT fails could be avoided by checking that light-bulbs work, the condition and pressures of tyres and that mirrors, wipers and washers work, there is further work to do,” he said.

“I am appalled by the number of operators who have not even checked whether their inspection sheets are up to date by reference to DVSA’s Guide to Maintaining Roadworthiness.

“In the space of two weeks, two unconnected operators appeared before me suggesting their vehicles were being inspected against safety standards from 1972.”

aide automotive market a range of Brake Testing, Servicing & Diagnostic Tools for commercial vehicle workshops.
With the Bowmonk BrakeCheck Portable Decelerometer Printer kit, a workshop can meet the 3 additional required brake tests with minimum fuss
For Trailer Servicing & Diagnostics, aide offer a complete Trailer Electrical (ABS Light & EBS CAN Line Test), Light and Air Brake Tester with Diagnostics interface for Trailer ECU Code Reading / Clearing and management data viewing.
EBS/ABS Sensor Master testing can be conducted with the Sensor Master, while Battery Diagnostics Tests with a Midtronics MDX Battery Tester.
aide automotive offer a range of products to help with DVSA Guide Roadworthiness. Contact us via our website www.aideautomotive.com
Brake Tester, Diagnostics, Battery Testers

aide auto Market Truck & Trailer Workshop Test Tools

JUST Trailer Diagnostics!

August 7th, 2017 Comments off

Trailer Diagnostics Wabco, Haldex & Knorr Bremse

SWB Fleet Maintenance Waste No Time In Using New Trailer Diagnostics Kit

Aftermarket Trailer Diagnostics device “Code Talk” is an ideal cost effective trailer diagnostic tool to quickly read and clear codes on EBS/ABS braking system.
The hand set will communicate with a trailer’s ECU, reading and clearing ABS/EBS fault codes on Wabco, Knorr Bremse and Haldex systems. With this trailer workshops can eliminate fault finding by reading the ECU codes to determine where a fault lies. Being able to clear historic codes is ideal within a service and inspection. Knowing a system is clear and then reviewing to see that faults the ECU has recorded is beneficial.
SWB Fleet of Colsterworth near Grantham recently purchased a system for onsite repairs.
It wasn’t long before the Code Talk was in use and SWB tweeted…
“Delivered on a Saturday SWB Fleet tweeted later that week “@SwbFleet completing another roadside repair for @MillersRec using my new EBS kit thanks to @aideautomotive #24/7 #tryme”
Code Talk Is The Only JUST Trailer Diagnostics Scanner Available.
To purchase the Trailer Diagnostics product “Code Talk” via our online PayPal shop – Click On Purchase Trailer Diagnostics
More From aide automotive’s Matthew Burke on 0115 8456471 or matt@aideautomotive.com
Trailer ECU Code Reader

Trailer Diagnostics With Code Talk a ECU Code Reader

 

aide Introduce a PayPal Online Shop For Products & Accessories

July 12th, 2017 Comments off

Commercial Vehicle Product Online Shop

aide Introduce a PayPal Online Shop For Products & Accessories

aide automotive have moved forward with a refresh on the websites category pages with the addition of a Online PayPal SuperMarket.

The Online SuperMarket can be found from the homepages navigation bar toward the top of the homepage, simple to use the shop utilises PayPal as the payment merchant. With the option to buy single or multiple items with ease, the SuperMarket will keep growing as new products are introduced or updates become available.
At present the Bowmonk BrakeCheckEBS/ABS Sensor Tester, TrailerCheck, TestaTow, Susie Easy Grips, Truck Anti Siphons, Truck Fresnel Lens, Truck 5th Wheel Lube Liner ISOCheck‘s are available now.
Further exsisitng products will be added soon, but to see all products available please click on aide automotive’s Online SuperMarket.
If you prefer to purchase with the personnel touch, please do not hesitate to call us on 0115 8456471, we accept cards as an alternative to PayPal.
Purchase A Bowmonk BrakeCheck Online

Online PayPal Purchase @ aide automotive

24 volt Commercial Trailer ECU Diagnostics

June 23rd, 2017 Comments off

Trailer ECU Diagnostics

Code Talk Featured In Truck & Bus Product Focus

The latest Truck & Bus Product Focus feature “Vehicle Diagnostics” was released this week with aide automotive’s Trailer Diagnostics product Code Talk featured.
Truck & Bus Product Focus was launched in 2008, having an 13,900+ email database. Truck & Bus Product Focus is a weekly email newsletter to the commercial vehicle industry.
Truck & Bus Product Focus achieves an average open rate of 22.3%. The average for business to business is 5%-15%.
aide automotive’s product advert is detailed below:
JUST Trailer Diagnostics!
The Only JUST Trailer Diagnostics Scanner Available
Code Talk is an ideal cost effective trailer diagnostic tool to quickly read and clear codes on EBS/ABS trailer braking system.
The trailer diagnostics hand set will communicate with a trailer’s ECU, reading and clearing ABS/EBS fault codes on Haldex ABS, EBS Gen 1 & 2 & 3 Knorr-Bremse EBS Gen 1 & G2, WABCO ABS, TEBS ‘D’ & Latest ‘E’. Trailer EBS systems are accessed via the ISO socket.
Simple to use and operate, Code Talk makes trailer diagnostic maintenance an affordable option to any repairer or fleet workshop.
Code Talk – Trailer Diagnostics is supplied as a stand-alone purchase.
No Annual Fees!
All Cables Included!
Covers All Brake Systems!
To read more please click on JUST Trailer Diagnostics
ECU Trailer Code Reader

24 Volt Commercial Trailer Diagnostics Haldex Wabco Knorr Bremse